Description
The Redding Competition Seating Die for 6.5 Grendel is one of those tools that separates good handloads from great ones. Built around Redding's patented floating seating stem, it was designed to solve the concentricity problems that plague ordinary seater dies. The case and bullet are fully supported and aligned inside a close-fitting, precision ground sleeve before the bullet ever starts into the neck, so your rounds come out straight and consistent instead of fighting runout at the muzzle.
What Makes the 6.5 Grendel Competition Seater Different
The heart of this die is the fit between the bullet guide and seating stem. Tolerances are held so tight that the stem can be shown to float on a column of air, and the stem itself is precision ground to match the bullet diameter. That translates to less bullet wobble and tighter groups on paper. It's the same seater Redding builds into their National Match set, so you're getting a competition-grade component on its own.
Dialing In Seating Depth
Up top you get a micrometer adjustment calibrated in .001-inch increments and infinitely adjustable without clicks, which makes fine-tuning your seating depth quick and repeatable. It also has a zero-set feature so you can lock in your rifle's favorite depth and return to it load after load. If you chase the lands or run a few different bullet profiles, that micrometer earns its keep fast.
Good to Know Before You Order
This die seats bullets only and does not crimp, so if your load calls for a taper crimp you'll want to add a separate crimp die. It uses standard 7/8-14 threads and works with a #12 shellholder (sold separately). One thing worth noting from experienced Grendel loaders: the Competition seater isn't built for heavily compressed loads, so if you're running compressed powder charges a standard seater with a micrometer top may suit you better. For everything else, this is about as refined as 6.5 Grendel bullet seating gets.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55478
- UPC: 611760554780
- Cartridge: 6.5 Grendel
- Die Type: Competition Bullet Seating Die
- Bullet Diameter: 0.264 in
- Adjustment: Micrometer, .001-inch increments, infinitely adjustable
- Seating Stem: Precision ground floating stem (STD profile)
- Thread: 7/8-14
- Shellholder: #12 (sold separately)
- Crimp: No, seats bullets only
What’s Included
- Redding Competition Seating Die for 6.5 Grendel (standard profile seating stem installed)
Frequently Asked Questions
Does the Redding 6.5 Grendel Competition Seating Die crimp the bullet?
No, this die seats bullets only and does not apply a crimp. If your load needs a taper crimp, you'll want to add a separate crimp die. Many Grendel loads for bolt guns do fine without a crimp, but semi-autos often benefit from one.
What makes the Competition seater more accurate than a standard seating die?
The case and bullet are fully supported and aligned inside a close-fitting, precision ground sleeve before seating begins, which cuts down on runout and keeps rounds concentric. The floating seating stem is ground to match bullet diameter so the bullet goes in straight. That consistency is what helps tighten groups on target.
Is a shellholder included with this die?
No, the shellholder is sold separately. The 6.5 Grendel uses a #12 standard shellholder with Redding presses. If you're new to the cartridge, it's an easy add to your order so you're ready to load.
Can I use this die with heavily compressed loads?
Redding notes the Competition Seating Die is not intended for heavily compressed loads, since the pressure can stress the floating seating stem. If you run compressed powder charges, a standard seating die with a micrometer top is a better fit. For typical and match loads, this die performs beautifully.



Reviews
There are no reviews yet.