Description
If you're loading 6.5 Creedmoor and want brass that chambers clean every single time, the Redding 91446 Full Length Sizing Die is one of those tools that earns its keep on the bench. This is a single full length die from Redding's Series A lineup, and it handles the heavy lifting of case prep in one pass. It resizes the body, shoulder, and neck back down to minimum SAAMI dimensions while the built-in decapping rod assembly knocks out the spent primer at the same time. The included neck expander button sets your case mouth back to the right diameter so bullet seating stays consistent.
What the Redding 91446 Actually Does on the Press
Full length sizing is the go-to for brass that needs to run reliably across different rifles, feed from a magazine, or get back into shape after a few firings. Because this die works the whole case, you get ammo that drops into any standard chamber regardless of action type. That makes it a smart pick for semi-autos, bolt guns you share brass between, and hunting loads where reliable chambering matters more than squeezing out that last bit of case life.
Build Quality Behind the Redding 6.5 Creedmoor Sizing Die
Redding has a reputation for tight tolerances, and this die reflects it. The sizing surfaces are hand-polished to a surface hardness of Rc 60 to 62, which cuts down on sizing effort and keeps things smooth stroke after stroke. The bodies are machined from heat-treated alloy steel on precision lathes, so you're getting a die that holds its dimensions and lasts for the long haul. It's made in the USA and uses the industry-standard 7/8-14 thread, so it threads right into virtually any standard single stage or turret press.
Setting Up Your Redding Full Length Die
Keep in mind this is the sizing die on its own, not a full set, so you'll want a matching seating die to finish your loads. You'll also need the correct shell holder (Redding #1 for 6.5 Creedmoor), since that isn't included. A headspace or case gauge is worth having on hand to dial in your shoulder bump when you set the die up for your particular rifle.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 91446
- UPC: 611760914461
- Cartridge: 6.5mm Creedmoor
- Die Type: Full Length Sizing Die
- Die Series: Series A
- Material: Heat-Treated Alloy Steel
- Surface Hardness: Rc 60-62 (hand-polished sizing surfaces)
- Thread Size: 7/8-14
- Bullet Diameter: 0.264 in
- Shell Holder: Redding #1 (not included)
- Country of Origin: USA
What’s Included
- Redding 91446 Full Length Sizing Die (6.5 Creedmoor)
- Decapping rod assembly with neck expander (size button)
- Decapping pin
- Standard lock ring
Frequently Asked Questions
Does the Redding 91446 come as a complete die set?
No, the 91446 is the full length sizing die only. To load complete rounds you'll also need a seating die, such as Redding's 6.5 Creedmoor seater, or you can step up to one of Redding's full length or deluxe die sets that bundle everything together.
Is a shell holder included with this 6.5 Creedmoor sizing die?
The shell holder is not included. For 6.5 Creedmoor you'll want the Redding #1 shell holder, which fits the case head and is required for the die to work on your press.
What does full length sizing do compared to neck sizing?
A full length die resizes the entire case, the body, shoulder, and neck, back to minimum SAAMI dimensions, and decaps the spent primer in the same stroke. This produces brass that chambers reliably in any standard chamber, making it the better choice for semi-autos, hunting loads, and brass shared between rifles. Neck-only sizing works the neck alone and is typically favored for brass fired in one specific bolt gun.
Will this Redding die fit my press?
Yes, it uses the industry-standard 7/8-14 threaded body, so it threads into virtually any standard single stage, turret, or progressive press. A case or headspace gauge is handy for dialing in proper shoulder bump when you set it up for your rifle.





Reviews
There are no reviews yet.