Description
The Redding Competition Bushing Neck Die Set is built for the 6.5 Creedmoor handloader who sweats the small stuff. This is a three-piece set that includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seating Die, all designed to work together to keep neck and bullet runout to a minimum. If you shoot a bolt gun and reload with brass you've already sorted or neck turned, this is the kind of tooling that rewards that prep work with tighter, more consistent ammo.
How the Redding Competition Bushing Neck Die Set Earns Its Keep
The neck sizing die uses a bushing system that lets you dial in exactly how much neck tension you want. As the case moves up, it rides in a tightly fitted sliding sleeve while the bushing self-centers on the neck, so the case stays supported and aligned the whole way through. A micrometer head controls how far down the neck you size, which makes partial neck sizing (a favorite benchrest trick) easy to repeat load after load. Worth noting, the die ships without a size button, since it's made for shooters who've already uniformed their necks. Neck bushings are purchased separately so you can match the exact tension your brass and bullet combo likes.
Dialing In Seating Depth With the Competition Seater
The Competition Bullet Seating Die is the star of the set for a lot of folks. The cartridge and bullet are both supported in a close-fitting ground sleeve before seating even begins, which is how Redding gets that famously low runout. The seating stem fits so precisely it's said to float on a column of air. The micrometer top is calibrated in .001 inch increments and infinitely adjustable, plus it has a zero set feature so you can lock in your favorite seating depth and return to it any time. It comes with a standard seating stem that handles most bullet shapes, and a VLD stem is available separately if you run long, pointed match bullets.
Why the Body Die Rounds Out the Set
Since neck sizing alone eventually makes brass stiff to chamber, the included Body Die resizes the case body and bumps the shoulder back without touching the neck. That keeps your cases feeding smoothly through repeated firings while leaving your carefully set neck tension untouched. It's a smart combo that gives you the longevity of body sizing with the accuracy edge of bushing neck sizing.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 58446
- UPC: 611760584466
- Cartridge: 6.5mm Creedmoor
- Bullet Diameter: 0.264 in
- Set Type: 3-Die Competition Bushing Neck Sizing Set
- Adjustment: Micrometer, calibrated in .001 in increments
- Standard Shellholder: #1 (sold separately)
- Thread: 7/8-14
- Bushing Range: 0.285 to 0.293 in (bushings sold separately)
- Country of Manufacture: United States
What’s Included
- Competition Bushing Neck Sizing Die
- Body Die
- Competition Bullet Seating Die with standard seating stem
- Storage case
Frequently Asked Questions
Do neck bushings come with the Competition Bushing Neck Die Set?
No, neck sizing bushings are sold separately. This lets you choose the exact bushing size to match your brass thickness and the neck tension you want. For 6.5 Creedmoor, the typical bushing range runs from about 0.285 to 0.293 inches, and measuring a loaded round's neck diameter is the best way to pick your starting size.
Is a shellholder included with this 6.5 Creedmoor die set?
The shellholder is not included and is purchased separately. For 6.5 Creedmoor, Redding lists the standard #1 shellholder. If you already reload other cartridges that share the same case head, there's a good chance you already own what you need.
Does this set come with a size button for the necks?
No, the Competition Bushing Neck Sizing Die ships without a size button on purpose. It's designed for handloaders who have sorted their brass for neck thickness or neck turned their cases, so an expander isn't needed. If you do want one, carbide size button kits are available separately.
What kind of seating stem comes in the Competition Seating Die?
The die arrives with a standard seating stem that works well with most common bullet shapes. If you load long, pointed VLD or match-style bullets, a VLD stem is available separately for a better fit against the ogive. Keep in mind the Competition Seating Die is not intended for compressed loads.





Reviews
There are no reviews yet.