$649.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is a Proof Research pre-fit stainless steel barrel chambered in 6.5 Creedmoor, cut to 26 inches with a 1-8 twist and a competition contour. It's threaded and chambered to drop straight onto a Defiance Ruckus action, so instead of shipping your gun off to a smith, you thread it on, check headspace with proper go/no-go gauges, and you're ready to shoot. The muzzle comes threaded 5/8-24 for a brake or suppressor, and it wears a fat, stiff competition profile that soaks up heat and holds point of impact through long strings of fire.
The 1-8 twist is the sweet spot for this cartridge in a match setting. It's fast enough to stabilize the heavy, high-BC bullets 6.5 Creedmoor shooters lean on, roughly the 130 to 147 grain range that dominates precision rifle series stages. That combination of a proven cartridge and the right twist is a big part of why 6.5 CM stays a favorite for anyone chasing small groups at distance.
Proof cuts and lead-laps every barrel to the same standard across their steel and carbon fiber lines, and their barrels have earned a real reputation among top-level PRS competitors. The 416 stainless holds up well against erosion and corrosion, and the material is built to handle the chamber pressures 6.5 Creedmoor generates. The heavier competition contour adds mass right where you want it for consistent tracking and repeatable shots.
One thing to double check: this drop-in is cut for Defiance Ruckus actions with the recessed bolt nose only. It won't play nice with cone, flat, or control-round-feed bolt setups, so match it to your action before you buy. Barrels are specific to action type and length and aren't interchangeable across platforms.
No, that's the whole point of a pre-fit. It comes already chambered and threaded, so you thread it onto your Defiance Ruckus action, torque it down, and verify headspace with go/no-go gauges. You'll want a barrel vise and action wrench, but you can handle the swap at home without shipping anything off.
This one is cut specifically for the Defiance Ruckus action with the recessed bolt nose option. It will not work with cone, flat, or control-round-feed bolt noses. Confirm which bolt nose your Ruckus has before ordering, since these barrels aren't interchangeable across action types.
The 1-8 twist is the go-to for match 6.5 Creedmoor because it reliably stabilizes the heavier, high-BC bullets from about 130 to 147 grains that competitors run. That gives you the wind-bucking performance and long-range consistency the cartridge is known for. It's the most common competition twist for this caliber for good reason.
Yes, it comes with a 5/8-24 muzzle thread, which is the standard for 6.5 Creedmoor. That lets you run most common brakes or a suppressor right out of the gate. Just match your device to that thread pitch.
| UPC | 843068123140 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 123140 |
| Length | 26'' |
You must be logged in to post a review.
Reviews
There are no reviews yet.