Description
The Forster 6.5 PRC Bushing Bump Neck Sizing Die is built for the handloader who cares about repeatable neck tension and brass that lasts. Instead of working the whole case like a full-length die, it sizes the neck with your choice of bushing and bumps the shoulder back just enough for reliable chambering. The body of the case keeps its fire-formed fit to your rifle, which is a big part of why these dies have such a loyal following on the precision side of the bench.
What the 6.5 PRC Bushing Bump Die Does Differently
This die handles neck sizing reduction and shoulder bump in one step, so your case necks come out straighter and stay in better alignment with the center line of the brass. A decapping assembly is included for depriming while you size, and there's no expander ball in the mix. That means the bushing you pick, not a ball being dragged back through the neck, sets your inside neck diameter. The result is less runout and a more consistent grip on the bullet.
Choosing Bushings for the Forster 6.5 PRC Neck Die
Bushings are sold separately and are not included with the die, so plan on ordering those to match your brass. Forster recommends picking a bushing roughly .002 inch under what a loaded round measures at the neck, and they come in .001 inch increments so you can fine-tune tension to your exact neck wall thickness. Worth noting: this die is cut for Forster bushings specifically and won't take Redding or Wilson bushings, so keep your bushing orders in the Forster family.
Why Reloaders Reach for the 6.5 PRC Bushing Bump Setup
Folks who shoot the 6.5 PRC for distance tend to be picky about concentricity and case life, and this die delivers on both. By only sizing the neck as much as needed and keeping that glove fit in the body, you avoid overworking the brass and get more firings out of every piece. The interior of Forster's bushings is finished smooth for easy, consistent neck sizing, and the whole setup drops right into a Forster Co-Ax or any standard press using the shellholder your press maker recommends.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BBD3409
- UPC: 757253991325
- Caliber: 6.5 PRC
- Die Type: Bushing Bump Neck Sizing Die
- Sizing Style: Neck sizing and shoulder bump in one step
- Decapping: Decapping assembly included, no expander ball
- Bushing Compatibility: Forster bushings only (not Redding or Wilson)
- Bushing Increments: 0.001 inch
- Bushings Included: No, sold separately
- Shipping Weight: 0.54 lb
What’s Included
- One Forster 6.5 PRC Bushing Bump Neck Sizing Die
- Decapping assembly
- Instructions
Frequently Asked Questions
Does the Forster 6.5 PRC Bushing Bump Die come with bushings?
No, the die ships without bushings and you order them separately to match your brass. Forster suggests a bushing about .002 inch smaller than a loaded round measures at the neck, and they come in .001 inch steps so you can dial in tension. This die only accepts Forster bushings, not Redding or Wilson.
What's the difference between this bushing bump die and a standard full-length die?
A full-length die sizes the whole case body and neck, while this bushing bump die only sizes the neck and bumps the shoulder back. That leaves the case body with its fire-formed fit to your chamber, which helps with concentricity and stretches out case life. It's a popular choice for precision 6.5 PRC loads.
Does the die deprime while sizing?
Yes, it includes a decapping assembly that punches out the spent primer during the sizing stroke. There's no expander ball on this setup, so the bushing you select is what determines your inside neck diameter. That approach keeps runout down and your neck tension consistent.
Will this die work in a non-Forster press?
It works in standard presses as well as the Forster Co-Ax. If you run a Co-Ax you won't need a shellholder since those presses don't use one, but in any other press just use the shellholder your press manufacturer recommends. The die threads in like any standard reloading die.




Reviews
There are no reviews yet.