Description
If you're running a bolt gun in 6.5 Grendel and chasing tighter groups, neck sizing is one of the easiest ways to get there. This Lee Precision die handles the job with a steel collet that clamps the case neck down onto a precision mandrel, giving you a straight, concentric neck that's sized evenly from top to bottom. The body of the case stays fire-formed to your chamber, which is where a lot of the accuracy and case-life gains come from.
How the 6.5 Grendel Collet Neck Sizer Works
Instead of pulling an expander ball back through the neck like a standard die, the collet squeezes the outside of the neck inward against a central mandrel that holds the decapping pin. The result is very low runout, often measured under a thousandth, and a crisp neck-to-shoulder junction without the brass buildup you can see from some bushing dies. A nice bonus: there's no case lube involved, so you skip the mess and the cleanup afterward.
Longer Brass Life and Better Accuracy
Because the die only works the neck and leaves the case body alone, your 6.5 Grendel brass doesn't get stretched and worked the way it does with full-length sizing. Lee states cases can last roughly ten times longer, with less frequent trimming to boot. For target and precision work, that combination of reduced runout and controlled neck tension is exactly what you want.
Good to Know Before You Load
This die is built for brass that's already been fired through your own rifle, so it's a great companion to a full-length set rather than a total replacement. It's geared toward bolt-action target shooting and isn't recommended for autoloaders, slide, or lever guns where neck-only sizing can cause chambering issues. A common tip among reloaders is to size the case, back it out an inch, give it about an eighth of a turn, and size again for an even rounder neck. Note that this is the collet die only, so you'll want a seating die to go with it if you don't already have one.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91638
- UPC: 734307916381
- Cartridge: 6.5 Grendel
- Die Style: Collet Neck Sizing Die
- Sizing Type: Neck only
- Collet/Mandrel: Steel collet with precision mandrel
- Case Lube Required: No
- Best Suited For: Bolt-action target and precision loading
- Country of Origin: United States
What’s Included
- Lee Precision 6.5 Grendel collet neck sizing die
Frequently Asked Questions
Does the 6.5 Grendel collet neck sizing die need case lube?
No, this die sizes the neck without any case lubrication. The collet simply squeezes the neck against the mandrel in the center of the die, so there's nothing to clean off your brass afterward. That saves time and keeps your cases tidy.
Can I use this die for brass fired in other rifles?
It's recommended only for brass that has been fired through your own firearm. Neck sizing leaves the case body fire-formed to your specific chamber, which is what delivers the accuracy and longer case life. For mixed or range brass, a full-length sizing die is the better call.
Is this die a good choice for an AR-style 6.5 Grendel?
This collet neck sizer is designed for bolt-action target use and is not recommended for autoloaders, slide, or lever guns. Semi-auto rifles typically need full-length sizing for reliable feeding and chambering. If you're loading for an AR, look to a full-length die instead.
Does this include a seating die, or is it the sizing die only?
This is the collet neck sizing die only. You'll need a bullet seating die to complete your loading process if you don't already have one. Many reloaders pair this with a full-length set so they can switch between neck sizing and full-length sizing as needed.




Reviews
There are no reviews yet.