Description
This Lee Precision 90474 is a single cavity mold that drops a .540 diameter, 415 grain Improved Minie bullet sized for .54 caliber oversized bores. It is built around Lee's Modern Minie design, so it throws a hollow base conical that loads straight and shoots true from your muzzleloader. If you have been buying pre-cast Minies or paying a premium for factory projectiles, a mold like this pays for itself in short order once you start casting your own.
What the Lee 90474 Minie Mold Casts
The cavity is CNC machined from aluminum, which is the heart of why these molds have earned their reputation. Aluminum blocks heat up and cool down quicker than iron or steel, so you can usually start dropping good bullets after just a handful of casts. They also run about a third of the weight of steel blocks, which keeps your hands from wearing out during a long casting session. Aluminum will not rust and lead does not want to stick to it, though the blocks are a bit softer than steel so they appreciate gentle handling and a proper break in.
Automatic Core Pin on the 540-415-M
This is a hollow base Minie, and the automatic core pin self centers in the mold so the base forms cleanly every time. Open the mold upside down to empty it, close it back up, and you are ready for the next pour. That rhythm lets you comfortably cast around 200 bullets an hour once you find your groove. Pure lead is the way to go with Minies, and a touch of tin can make fill out even easier if you want to fine tune your results.
Casting Tips for the .54 Caliber Mold
Handles and a hard anodized sprue plate come included, so this is a complete setup right out of the box. Keep the sprue plate screw snug to avoid fins on the base, run your pot hot enough for clean fill out with pure lead, and lube the alignment pins with beeswax or an anti seize now and then. Treat it right and this mold will keep feeding your .54 for decades.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90474
- UPC: 734307904746
- Mold Designation: 540-415-M Improved Minie
- Caliber: 54 Caliber (Oversized)
- Bullet Diameter: 0.540 in
- Bullet Weight: 415 Grains
- Bullet Style: Improved Minie (Hollow Base)
- Cavities: 1 (Single Cavity)
- Core Pin: Automatic Self-Centering
- Block Material: CNC Machined Aluminum
- Sprue Plate: Hard Anodized
- Overall Length: 10.8 in
- Country of Origin: United States
What’s Included
- Single cavity 540-415-M Improved Minie mold (two aluminum block halves)
- Hardwood mold handles
- Hard anodized sprue plate
- Instruction sheet
Frequently Asked Questions
Does the Lee 90474 cast a round ball or a Minie bullet?
This mold casts an Improved Minie, which is a hollow base conical projectile, not a patched round ball. The bullet drops at a .540 diameter and roughly 415 grains, sized for .54 caliber oversized bores. If you are after a traditional round ball mold instead, you will want a different Lee model.
What kind of lead should I use with this Minie mold?
Pure lead is recommended for Minie bullets so the hollow base obturates and grips the rifling properly on firing. Many casters add about one percent tin to improve fill out and make casting a little easier without meaningfully hardening the bullet. Keep your pot temperature up to get clean, fully formed bullets.
Do the handles come with the Lee 90474 mold?
Yes. This single cavity mold ships with hardwood handles and a hard anodized sprue plate included, so it is ready to go once you break it in. No separate handle purchase is needed for this model.
How many bullets can I cast per hour with this mold?
Once your mold and pot are up to temperature and you settle into a rhythm, you can comfortably cast around 200 bullets an hour. The lightweight aluminum blocks heat quickly and the automatic core pin speeds up each cycle. Give the mold a proper break in on its first session for the best results.




Reviews
There are no reviews yet.