Description
Headspace is one of those things you can't eyeball, and getting it wrong on a 5.56 build isn't worth the gamble. This Forster kit gives you a complete three-gauge setup made specifically for the AR platform, with a 1.4646 inch 5.56 go gauge, a 1.4686 inch midrange gauge, and a 1.4736 inch max field gauge. Forster has been the name people trust in go/no-go gauges for years, and each piece here is precision ground from hardened steel so your readings are dependable every time.
What Sets the Forster 5.56 Armorer's Gauge Kit Apart
The standout feature is the design. Each gauge has a reduced rim and a cutout machined for the ejector, which means you can drop it in and check headspace without disassembling the bolt. That saves real time if you're checking multiple rifles or working through a batch of barrels, and it takes a lot of the fuss out of the process for someone doing this for the first time. Skip the tear-down, get your answer, move on.
How the Three Gauges Work Together
On an AR-15, headspace is set by the combination of your barrel, barrel extension, and bolt, so any time you pair a new bolt with a new barrel it's worth verifying. The go gauge confirms the chamber is deep enough for the bolt to close and run reliably. The midrange gauge gives you a tighter check that falls between go and field, which is handy for spotting a chamber creeping toward the loose end. The field gauge represents the outer limit; if the bolt closes on it, you've got excessive headspace and the rifle shouldn't be fired until it's sorted.
Who Reaches for This Kit
Home builders, working armorers, and anyone assembling from mixed parts will get the most out of this set. First-time builders like it for the peace of mind, and folks who've been running Forster gauges for decades keep coming back because the dimensions check out against known calibrated tools. Buy it once, keep it on the bench, and you're covered for every 5.56 project down the road.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0556-SET
- UPC: 757253989872
- Caliber: 5.56x45mm
- Go Gauge Length: 1.4646 in
- Midrange Gauge Length: 1.4686 in
- Max Field Gauge Length: 1.4736 in
- Material: Hardened steel, precision ground
- Design: Reduced rim with ejector cutout
- Style: Set
- Quantity: 1 kit (3 gauges)
What’s Included
- 1.4646 in 5.56 go gauge
- 1.4686 in midrange gauge
- 1.4736 in max field gauge
Frequently Asked Questions
Do I have to take the bolt apart to use this headspace gauge kit?
No, and that's the whole point of this Forster set. Each gauge is made with a reduced rim and a cutout for the ejector, so you can check headspace with the bolt assembled. It saves you the hassle of pulling the extractor and ejector every time you want a reading.
When should I check headspace on my 5.56 build?
Any time you pair a new bolt with a new barrel, swap a barrel, or build from scratch with mixed parts, it's worth verifying. Headspace on an AR is controlled by the barrel, barrel extension, and bolt working together, so even quality parts should be confirmed. A used rifle with unknown history is another good reason to check before firing.
What's the difference between the go, midrange, and field gauges?
The go gauge checks that the chamber is deep enough for the bolt to close and cycle reliably. The field gauge marks the maximum safe limit, and if the bolt closes on it your headspace is excessive. The midrange gauge sits between the two and gives you a tighter reference point for a more precise picture of where your chamber lands.
Will this kit work for .223 Remington too?
These gauges are dimensioned for 5.56 NATO, which runs a slightly longer headspace than commercial .223. Many builders use the 5.56 gauges on AR chambers cut for 5.56 or .223 Wylde, but if you're working strictly with a tight .223 chamber, a dedicated .223 gauge set is the better match. Match the gauge to how your barrel is chambered.




Reviews
There are no reviews yet.