$15.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Marble Arms 45-W front sight is one of those parts that just does its job and looks right doing it. This is the barrel-mounted version with a .450" height measured from the top of the bead to the bottom of the dovetail, a .531" base width, and a bright 3/32" white bead pressed into a solid brass body. It's a proven pattern that Marble Arms has been building on rifles, shotguns, and lever guns for well over a century, and it's still a go-to when a factory sight is too short, too dim, or just plain worn out.
Height matters more than folks expect on iron sights. If you've added a taller rear peep or a receiver sight and your rifle now prints high no matter how far down you crank the rear, stepping up to a taller front bead like the .450" 45-W is the fix. That white bead grabs your eye fast in low light and against dark backgrounds, which is exactly what you want when a whitetail steps out at last light or you're running a lever gun in the brush.
This sight seats into a standard 3/8" dovetail and drifts in from the side for windage. Marble's dovetails often run a hair oversized on purpose, so plan on a little fitting with a fine file to get a nice snug press fit. Go slow, check it often, and tap it in with a brass or nylon punch so you don't mar the bead. Once it's set, it stays put.
Marble Arms has been the name in iron sights since the late 1800s, and their reputation for durable, American-made parts is well earned. The 45-W carries that same old-school quality, with a machined body and a clean, high-visibility bead that pairs perfectly with a peep or open rear. It's a simple, dependable upgrade that brings a lot of character back to a classic rifle.
It's built for a standard 3/8" dovetail with a .531" base width, which covers a wide range of rifles, lever guns, and shotguns. Marble Arms dovetails often come a touch oversized on purpose so you can hand-fit them for a tight fit. Plan on a little filing with a fine file to seat it snug, and always measure your existing dovetail before ordering.
Front sight height controls where your rifle prints, so the correct height depends on your rear sight and sighting radius. If your rifle shoots high even with the rear sight bottomed out, a taller front bead like the .450" 45-W brings your point of impact back down. Measuring your current front sight height with a micrometer and comparing it to Marble's height chart is the surest way to pick the right one.
The white 3/32" bead stands out sharply against dark targets, timber, and low-light conditions, which many hunters prefer over a gold bead in shadowy woods. Gold tends to shine better in bright open country, while fiber optic glows hottest in daylight. It really comes down to where and when you hunt, but white is a solid all-around choice.
Yes, with the right approach. It drifts into the dovetail from the side, so you'll want a brass or nylon punch and a light hammer to avoid marring the bead. Take it slow, check the fit often as you file, and once it's pressed in snug it will hold zero without any screws or adhesive.
| UPC | 871373002768 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 204532 |
| Color | White |
| Style | Barrel Mounted |
You must be logged in to post a review.
Reviews
There are no reviews yet.