$17.60
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run an L.E. Wilson case trimmer and load .444 Marlin, this is the piece that makes the whole system work. The case holder is caliber-specific, meaning it's cut to match the exact dimensions of .444 Marlin brass so every case sits in perfect axial alignment with the cutter head. Instead of gripping the rim like a traditional shell holder, the Wilson design cradles the body of the case much like a rifle chamber, which keeps case mouths coming out square and trim lengths repeatable from the first piece to the last.
This particular holder is set up for New and resized brass. That's an important distinction with Wilson holders, since new case holders are sized to work with brand new and full-length resized cases, while fired-case holders are meant for brass that has only been neck sized. Since this one is the New-case version, it'll handle your factory-fresh .444 Marlin brass and anything you've run back through a full-length sizing die. Using it is about as simple as it gets: drop the case in the holder, tap the head lightly on a wood block or firm surface to seat it, set it on the trimmer rails against the stop, and crank. When you're done, a gentle tap on the case mouth pops it right back out.
L.E. Wilson has been building precision reloading tools for generations, and the trimmer system is a favorite among folks who care about consistent brass. The holder isn't just for trimming either. It also doubles as a secure fixture for primer pocket reaming, neck reaming, and deburring when paired with the matching Wilson tooling. One tip worth passing along: wipe it down and keep it somewhere dry between sessions, since bare steel appreciates a little care. For anyone loading the big-bore .444 lever gun, this is the holder that keeps your case prep tight and your groups honest.
This holder is the New-case version, so it's built for brand new and full-length resized .444 Marlin brass. Wilson makes separate holders designated for fired cases, which are intended for brass that has only been neck sized. If your brass has been run through a full-length sizing die, this holder is the right one for the job.
It's designed to work with the L.E. Wilson case trimmer system. The holder balances on the trimmer rails between the cutter head and the stop screw, supporting the case so it trims square. It is not interchangeable with shell-holder-style trimmers from other brands.
Yes. Beyond trimming, the holder works as a secure fixture for primer pocket reaming, neck reaming, and deburring when used with the matching L.E. Wilson tools. That makes it a handy part of your overall case prep bench, not just a one-trick tool.
Drop the .444 Marlin case into the holder and tap the case head lightly on a wood block or firm surface to seat it fully. Then set the holder on the trimmer rails against the stop and trim. When you're finished, a light tap on the case mouth releases it.
| UPC | 815145020727 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-444M |
You must be logged in to post a review.
Reviews
There are no reviews yet.