0
0

Redding Micrometer Adjustable Profile Crimp Die 44 Special/44 Magnum

UPC: 611760312861

$87.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimping is one of those steps that separates good handgun ammo from great handgun ammo, and this Redding Profile Crimp Die handles the 44 Special and 44 Magnum crowd beautifully. Rather than relying on the crimping ring built into a seating die, this is a dedicated crimp die that applies its work after the bullet is already seated to depth. That separation of duties is what lets it deliver a tighter, more uniform roll crimp without shaving lead or nudging the bullet off center, which matters a lot when you're loading cast bullets or stout magnum charges.

What Sets the Micrometer Adjustable Profile Crimp Die Apart

The standout feature here is the knurled micrometer barrel sitting right on top of the die. Traditional crimp dies lean on the coarse 7/8-14 thread pitch and a lock ring you have to wrestle with every time you want to tweak things. This one skips that hassle. The top-mounted micrometer gives you roughly plus or minus .100 inches of on-the-fly adjustment in .001 inch increments, so dialing in your crimp is quick and repeatable. That's especially handy on a progressive press where reaching down to re-set a lock ring is a pain.

Why 44 Shooters Reach for the Profile Crimp Die

Profile crimp dies have earned a strong reputation among revolver reloaders for a reason. The die produces a combined taper and roll profile that grips bullets with a cannelure or crimp groove and holds them firmly against recoil, which cuts down on bullet creep in a cylinder full of heavy 44 Magnum loads. Reloaders consistently point to the smooth, line-free finish on the brass compared to some collet-style options.

Setting Up the 44 Special/44 Magnum Crimp Die

Since this die crimps only, you'll want your bullets seated to the correct overall length in a previous operation before running cases through it. It uses the standard 7/8-14 threaded body, so it drops right into any common single stage or progressive press. Keep in mind it's built for cartridges that headspace on the rim, like the 44 Special and 44 Magnum, not ones that headspace on the case mouth. Pair it with your existing sizing and seating setup and you've got a crimp station that earns its keep load after load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 31286
  • UPC: 611760312861
  • Caliber: 44 Special / 44 Magnum
  • Die Type: Micrometer Adjustable Profile Crimp Die
  • Crimp Style: Combined taper and roll (profile) crimp
  • Adjustment: Top-mounted knurled micrometer barrel
  • Adjustment Range: Approximately ±.100" in .001" increments
  • Thread: 7/8-14 standard
  • Application: Handgun / revolver cartridges
  • Country of Origin: United States

What’s Included

  • Redding 44 Special/44 Magnum Micrometer Adjustable Profile Crimp Die (single die)

Frequently Asked Questions

Does this Profile Crimp Die seat bullets too?

No, this is a dedicated crimp-only die. You'll need to seat your bullets to the correct overall length in a separate operation before running the cases through it. Crimping as its own step is what lets this die deliver such a clean, uniform roll crimp without disturbing the bullet.

What makes the micrometer adjustment useful?

The knurled micrometer barrel sits on top of the die and gives you roughly plus or minus .100 inches of adjustment in .001 inch increments. That means you can fine-tune or change your crimp without fighting a lock ring, which is a real time-saver on a progressive press with tight clearances.

Will this die work on both 44 Special and 44 Magnum?

Yes. The 31286 is set up for both 44 Special and 44 Magnum, since the two share the same case diameter and bullet. It works great across the 44 family as long as you're loading bullets with a cannelure or crimp groove.

Does it fit a standard reloading press?

It does. The die uses the industry-standard 7/8-14 threaded body, so it threads into virtually any common single stage or progressive press without any adapters or special hardware.

Additional information

UPC

611760312861

Manufacturer

Manufacturer Part Number

31286

Reviews

There are no reviews yet.

Be the first to review “Redding Micrometer Adjustable Profile Crimp Die 44 Special/44 Magnum”