Description
Loading for the 408 CheyTac means you're chasing extreme long-range performance, and the brass work has to match. This Forster full length sizing die (MPN 006025) handles the heavy lifting on fired cases, taking that big magnum-class brass back to spec so it chambers smoothly round after round. It's the same precision reputation Forster has built across its die lineup, scaled up for one of the largest cartridges a handloader is likely to tackle.
What the 408 CheyTac Sizing Die Does on Every Stroke
In a single pass this die sizes the case neck, shoulder, and body while expanding the neck and knocking out the spent primer. That full length treatment brings worked brass back into tolerance so it re-chambers with minimal play, which is exactly what you want when the resulting brass flow from firing starts to grow your cases out of spec. A precisely positioned vent hole in the die body lets trapped air and sizing lube escape, so you're not risking dented cases or stressed die components as the ram comes up.
E-Z Out Expander and Steel Build on the Forster 408 CheyTac Die
The E-Z Out Expander button is where Forster earns its concentricity reputation. It sits higher in the neck than most expanders, supporting and aligning the axis of the neck and case as the brass is drawn back out of the die. That keeps runout low and gives you straighter ammo without extra steps. Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating, so it holds up to the force this much brass demands.
Fitting the 408 CheyTac Die to Your Press
Because the 408 CheyTac rides on a large .635 inch rim, it needs an oversized press and shellholder setup rather than a standard rig. A quick note for Co-Ax owners: the rim is too large for the LS jaws, so you'll want a shellholder adapter plate paired with a conventional shellholder. If you're running military-style brass with crimped primers, it's worth decapping first before sizing. Thread it into your press, set your shoulder bump, and this die will do its job quietly for a long time.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 006025
- UPC: 757253990113
- Cartridge: .408 CheyTac
- Die Style: Full Length Sizing Die
- Die Function: Sizes neck, shoulder and body, expands neck, decaps
- Expander: E-Z Out Expander button
- Material: Hardened, hand-polished steel
- Rim Diameter Note: Fits .635 in rim; requires oversized shellholder setup
What’s Included
- 408 CheyTac full length sizing die with E-Z Out Expander and decapping assembly
Frequently Asked Questions
What does the Forster 408 CheyTac full length sizing die do in one pass?
It sizes the case neck, shoulder, and body while expanding the neck and removing the spent primer. That brings fired brass back into spec so it re-chambers with minimal play. The vent hole in the die body lets trapped air and lube escape to protect your cases and the die.
Will this die work with a Forster Co-Ax press?
You can run it on a Co-Ax, but the 408 CheyTac's large .635 inch rim is too big for the press's LS jaws. You'll need a shellholder adapter plate used with a conventional shellholder. Any press built to handle this large of a cartridge with the right shellholder setup will do the job.
What is the E-Z Out Expander and why does it matter?
It's Forster's expander button that sits higher in the neck than most, supporting and aligning the neck and case axis as the brass is pulled out of the die. That keeps your necks concentric and your loaded rounds straight. Lower runout generally means better accuracy, which is the whole point on a round like the 408 CheyTac.
Do I need to do anything special with military brass before sizing?
If your 408 CheyTac brass has crimped primers, remove the spent primer with a decapping die first before running it through this sizer. Forster doesn't include a separate decapping die, so you'd source that elsewhere. For standard brass, the die decaps as part of the normal sizing stroke.





Reviews
There are no reviews yet.