Description
Redding has been building reloading gear in New York since 1946, and their Premium handgun sets are where their standard dies get a couple of worthwhile upgrades. This 66253 set is a three-die setup that covers both 40 S&W and 10mm Auto, which makes sense since the two share the same bullet diameter and case head. You get a titanium carbide sizing die, a special expander die, and a premium seating die topped with a bullet seating micrometer. Each die carries a large entry taper and radius so cases feed in smooth, which matters a lot once you're feeding a progressive press and trying to keep a rhythm.
What Sets the Redding Premium Die Set Apart
The sizing die uses titanium carbide, so you can size pistol brass without case lube and keep your hands and your bench clean. The expander is the piece that really earns its keep here. Redding gave it four distinct jobs: a smooth entry radius to start the case, the correct expanding diameter for a proper press fit on the bullet, a concentric ring up top that opens the mouth just slightly to help the bullet align, and a final flare for cast bullets so they don't shave lead on the way in. The expander plug is coated in TiN, titanium nitride, which adds surface hardness and lubricity and cuts down on brass buildup over long loading sessions.
Dialing In Seating Depth With the 66253 Set
The seating die comes with a bullet seating micrometer, so you can adjust seating depth in repeatable increments and get back to a setting after you've changed it. The seating die also handles crimp, either taper or roll depending on what the cartridge calls for, so a lot of folks running 40 S&W and 10mm can seat and crimp in one station or split the step if they prefer. Between the carbide sizing, the thoughtful expander, and the micrometer control, this set is aimed at the reloader who cares about straight, uniform ammo and plans to put real volume through it.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 66253
- UPC: 611760662539
- Cartridges: 40 S&W / 10mm Auto
- Die Style: 3-Die Set
- Sizing Die: Titanium Carbide (no case lube required)
- Expander: Special expander die with TiN-coated plug
- Seating Die: Premium seating die with bullet seating micrometer
- Crimp: Taper or roll crimp matched to cartridge
- Thread Size: 7/8-14
- Country of Origin: Made in USA
What’s Included
- Titanium carbide sizing die
- Special expander die with TiN-coated plug
- Premium seating die with bullet seating micrometer
- Instructions
Frequently Asked Questions
Does the Redding Premium die set work for both 40 S&W and 10mm Auto?
Yes, this 66253 set is made to load both 40 S&W and 10mm Auto. The two cartridges use the same bullet diameter and case head, so one set covers both. You'll just adjust your dies and powder charge to match whichever round you're building.
Do I need case lube with the carbide sizing die?
No, the titanium carbide sizing die lets you size straight-wall pistol brass without lube, which keeps your cases and your bench clean. That's one of the big reasons carbide dies are the go-to for high-volume handgun loading. A quick wipe is still never a bad habit, but it isn't required.
What does the bullet seating micrometer actually do?
The micrometer on the seating die lets you set and repeat your seating depth in precise increments. If you change a setting or swap bullets, you can return to a previous depth without guessing. It's the kind of control that helps keep your overall length consistent from round to round.
Will this Redding set run on a progressive press?
It will. The dies have a large entry taper and radius for smooth case feeding, which helps keep things flowing on a progressive setup. They use standard 7/8-14 threads, so they'll thread into common presses and tool heads.



Reviews
There are no reviews yet.