Description
If you load 40 S&W or 10mm Auto, the Hornady 40 S&W / 10mm Taper Crimp Seater Die handles two jobs in one station. It seats your bullet to depth and lays down a taper crimp in the same stroke, which is exactly what semi-auto handgun rounds want since they headspace on the case mouth. You dial in the crimp with its own adjustment screw, so you can tweak how much you're squeezing without messing with your seating depth. That kind of independent control makes load development a lot less frustrating.
What Sets This 40 S&W / 10mm Die Apart
The heart of this thing is the in-line bullet seating system. A floating alignment sleeve holds the bullet, case neck, and seating stem in line before the bullet ever starts into the case. The result is straighter seating, better concentricity, and fewer canted bullets coming off your press. Reloaders consistently point to that alignment as the reason their rounds chamber smooth and shoot tight.
Dialing In the Taper Crimp Seater Die
The taper crimp is the right call for 40 and 10mm. It removes the case flare and snugs the mouth around the bullet without biting into it or buckling the brass, so your ammo feeds and chambers clean in autos. If you'd rather crimp as a separate step, you can back the crimp all the way out and run this purely as a seater. It plays nice either way.
Built on a 7/8"-14 thread, it drops into any standard reloading press. It ships with a Sure-Loc lock ring that clamps around the die body instead of chewing on the threads, plus wrench flats for easy adjustments and a quick-disassembly retainer ring for cleaning without special tools. It's made in the USA and backed by Hornady's lifetime guarantee, so it'll outlast plenty of brass.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044178
- UPC: 090255441789
- Calibers: 40 S&W and 10mm Auto
- Die Type: Taper Crimp Seater
- Number of Dies: 1
- Thread: 7/8"-14
- Series: Custom Grade New Dimension
- Lock Ring: Sure-Loc with wrench flats
- Shell Holder Included: No
- Storage Box Included: Yes
- Country of Origin: USA
What’s Included
- Taper crimp seater die
- Sure-Loc lock ring
- Allen key for Sure-Loc ring
- Storage box
Frequently Asked Questions
Does the 40 S&W / 10mm die seat and crimp at the same time?
Yes. It seats the bullet and applies a taper crimp in a single stroke, so you don't need a separate crimp die. A dedicated adjustment screw lets you set the crimp amount independently from seating depth, and you can also back the crimp fully out to run it as a seat-only die.
Will this die fit my reloading press?
It uses the industry-standard 7/8"-14 thread, so it threads into any standard single-stage, turret, or progressive press. The Sure-Loc lock ring clamps around the die body and includes wrench flats, which makes swapping it in and out quick.
Does it come with a shell holder?
No, a shell holder is not included with this die. You'll need the correct shell holder for 40 S&W and 10mm Auto, which share the same case head, so a single holder covers both.
Can I load 40 S&W and 10mm Auto with the same die?
Yes, this die is set up for both cartridges since they use the same case diameter. You will adjust seating depth and crimp to match whichever round you're loading, and the floating alignment sleeve keeps bullets seated straight for both.




Reviews
There are no reviews yet.