0
0

Slip 2000 Carbon Killer 4 oz Bore Cleaner – Water-Based Solvent

UPC: 815706001042

$15.99

41 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Carbon has a way of turning routine cleaning into a wrestling match, especially on the parts that see the most heat. Slip 2000 Carbon Killer takes a different approach. It's an aggressive water-based soak that goes after the crusty, baked-on fouling other cleaners leave behind, breaking down carbon and lead the moment it makes contact. Instead of scrubbing until your arms give out, you drop your dirty parts in, walk away for a few minutes, and come back to metal that wipes clean.

What Carbon Killer Handles Best

This is a soaking cleaner built for internal metal parts, and that's where it earns its keep. It's popular for AR bolts and carriers, revolver cylinders and forcing cones, gas pistons, firing pins, compensators, flash hiders, and suppressor guts. It also breaks the bond between plastic wad fouling and metal, which makes it a favorite for folks running high volume through shotguns and semi-autos. If a part has years of neglect on it, this is the stuff that brings it back.

Getting the Most Out of Your Carbon Killer

Using it is about as simple as gun cleaning gets. Fully submerge your parts in a stainless tray or glass container, let them soak for no more than 15 minutes at a time, then wipe, brush, or rinse them under hot water. A lot of the carbon comes off on your hands before you even reach for a rag. Really stubborn parts might need a second soak and a light pass with a brush or a Scotch-Brite pad. When you're done, always re-lube with a Slip 2000 lubricant to displace moisture and keep fouling from sticking next time.

Why the 4 oz Carbon Killer Is Worth Keeping Around

One of the best things about this cleaner is that it's reusable. It keeps working even as it gets dirty, so stored properly in its sealed container, a single jar stretches across many cleanings. It's also non-flammable, non-hazardous, and biodegradable, which makes it easy to live with on the workbench. Just keep it off exterior finishes, since it's aggressive enough to affect bluing and some coatings if left on too long.

Key Specifications

  • Manufacturer: Slip 2000
  • Manufacturer Part Number: 60104
  • UPC: 815706001042
  • Volume: 4 oz
  • Product Type: Bore Cleaner / Solvent
  • Base: Water-based
  • Dissolves: Carbon, lead, and plastic wad fouling
  • Reusable: Yes
  • Safety: Non-flammable, non-hazardous, biodegradable
  • Recommended Use: Soaking internal metal parts
  • Max Soak Time: 15 minutes at a time

What’s Included

  • One 4 oz bottle of Slip 2000 Carbon Killer bore cleaner

Frequently Asked Questions

How long should I soak parts in Carbon Killer?

Keep parts submerged for no more than 15 minutes at a time. If a part is still holding stubborn carbon after that, brush off the loosened residue and give it another 10 to 15 minute soak. Extended soaking past that can start to fade bluing, so it's best to work in short cycles.

Can I use Carbon Killer on the outside of my gun?

No, this one is meant strictly for internal metal parts and bores. It's an aggressive cleaner that can damage or even strip some exterior finishes and bluing if left on too long. Stick to bolts, cylinders, gas pistons, comps, and suppressor parts, then re-lube when you're finished.

Is Slip 2000 Carbon Killer really reusable?

It is. The formula keeps working even as it gets dirty, so when stored properly in a sealed container a single jar will get you through many cleanings over several months. That reusability is one of the main reasons people keep a jar of it on the bench.

Does Carbon Killer work on lead and plastic wad fouling too?

Yes. It dissolves carbon and lead on contact and breaks down the bond between plastic wad fouling and metal, which makes it handy for shotgun and semi-auto users running a lot of rounds. For pairing it with a bore, apply it with a saturated patch or plug one end and fill the bore, let it soak, then brush and wipe clean.

Additional information

UPC

815706001042

Manufacturer

Manufacturer Part Number

60104

Length

5.5500

Product Type

CHEMICALS

State Restriction (AK)

NO SALE TO ALASKA

State Restriction (Guam)

NO SALE TO GUAM

State Restriction (HI)

NO SALE TO HAWAII

State Restriction (PR)

NO SALE TO PUERTO RICO

State Restriction (VI)

NO SALE TO VIRGIN ISLANDS

Reviews

There are no reviews yet.

Be the first to review “Slip 2000 Carbon Killer 4 oz Bore Cleaner – Water-Based Solvent”