Description
The Friedr. Dick 4" Barrette File in #1 cut is one of those tools that earns a permanent spot in the bench drawer once you use it. It's a Swiss-pattern file made for close, controlled work where a regular flat file would chew up everything it touches. The flat face carries double-cut teeth for a clean, efficient bite, while the back and both edges are safe, meaning no teeth at all. That's the whole point of a barrette: you can lay it right up against a finished surface and cut only where you want to.
What the Friedr. Dick Barrette File Is Built For
This shape shines on dovetails, sight cuts, slots, and any sharp-angled work where you need to reach a corner without marring the wall beside it. The edges are beveled to a 33-degree angle and rounded, so you can drop into tight internal angles and keep your line true. The file tapers in both width and thickness down to a fine point, which lets you work into progressively smaller spaces as you go. For sight dovetail fitting and other detail jobs common on the bench, that safe back is what makes the difference between a clean job and a scuffed one.
Why the #1 Cut Matters
The #1 cut sits in the fine-to-medium range for Swiss-pattern files. It removes material at a steady, predictable pace and leaves a smoother surface than a coarser cut, so it's a strong all-around choice when you want control over speed. Friedr. Dick has been making files in Germany for generations, and their chrome alloy steel and consistent tooth geometry are a big reason these hold up and keep cutting.
At 4 inches, this one is on the small, nimble end of the range, roughly a half-inch wide at the heel before it tapers off. It's the kind of file you reach for when the work is fussy and precision counts more than removal rate.
Key Specifications
- Manufacturer: Friedr. Dick GmbH
- Manufacturer Part Number: 11061020
- UPC: 613548062999
- Style: Barrette File, Swiss Pattern
- Length: 4 in (10.2 cm)
- Width: Approx. 1/2 in (12.7 mm)
- Cut: #1
- Cutting Face: Double-cut flat side
- Back & Edges: Safe (no teeth)
- Bevel Angle: 33 degrees
- Taper: Tapered in width and thickness to a point
What’s Included
- 4" Barrette File #1 Cut (Friedr. Dick, MPN 11061020)
Frequently Asked Questions
What is the barrette file #1 cut best used for?
It's made for precision work in tight, sharp-angled spots like dovetails, slots, keyways, and sight cuts. Because only the flat face has teeth, you can file right up to a finished surface without marring it. That makes it a go-to for detail jobs on the bench where control matters more than fast stock removal.
How coarse is the #1 cut on this Friedr. Dick barrette file?
The #1 cut lands in the fine-to-medium range for Swiss-pattern files. It cuts at a steady, controllable pace and leaves a smoother finish than coarser cuts. If you want a versatile file that balances removal rate with a clean surface, the #1 is a solid pick.
What does a safe back mean on a barrette file?
The back and both edges have no teeth, so those surfaces glide instead of cut. When you're working into a corner or against a shoulder, the safe back rides along the adjacent surface without scratching it. That's the whole reason a barrette shape exists and why it beats a standard flat file for detail work.
Is 4 inches a good size for this barrette file?
The 4-inch length is the smaller, nimble end of the barrette range and is well suited to fine finishwork. It measures roughly a half-inch wide at the heel before tapering to a fine point, so you can work into progressively tighter spaces. For fussy, close-quarters jobs it gives you more finesse than a full-size file.



Reviews
There are no reviews yet.