Description
If you're loading 380 Auto on a progressive press and want dies that keep up without fuss, the Redding Pro Series NxGEN Carbide 3-Die Set is built exactly for that job. Redding pulled the expander die out of this set on purpose, since most popular progressive machines flare the case mouth right at the powder drop station. What you get instead is a lineup tuned for speed, clean function, and tight, repeatable rounds shift after shift.
What's in the Redding Pro Series 380 Auto Set
The set runs three dies. First up is the NxGEN titanium carbide sizing die with a decapping unit, which resizes and deprimes your fired brass without a drop of case lube. That titanium carbide insert is about as hard and slick as it gets, so your cases glide through, friction stays low, and your press stays cleaner over long sessions. The second die is a dedicated Pro seating die with an oversized entry radius that funnels bullets into alignment even when you're cranking the handle fast, and it seats only, with no crimp built in. The third die handles crimping on its own. Because 380 Auto headspaces on the case mouth, this set comes with a taper crimp die, which is the right call for feeding reliability in this cartridge.
Why the Separate Crimp Die Matters
Splitting seating and crimping into two stations is where this set earns its keep. When you seat and crimp in separate operations, you get more consistent overall length and better accuracy out the other end. It's a small thing on paper that makes a real difference once you're chasing clean, uniform ammo in volume.
Running the 380 Auto Carbide Set on a Single Stage
These dies are designed with progressive machines in mind, but they'll also work on a single stage or turret press. Just keep in mind you'll want to add a separate expander die to flare the case mouth, since this set leaves that job to the powder station. Standard 7/8-14 threads mean it threads right into any common press, and the shellholder is sold separately.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 89170
- UPC: 611760891700
- Cartridge: 380 Auto (380 ACP)
- Series: Pro Series NxGEN
- Die Style: 3-Die Set
- Number of Dies: 3
- Sizing Die: NxGEN Titanium Carbide with decapping unit
- Crimp Type: Taper Crimp (headspaces on case mouth)
- Thread: 7/8-14
- Designed For: Progressive presses
- Case Lube Required: No
- Shellholder Included: No
What’s Included
- NxGEN Titanium Carbide sizing/decapping die
- Pro seating die (no crimping feature)
- Taper crimp die
Frequently Asked Questions
Does the Redding Pro Series 380 Auto die set include an expander die?
No, this set does not include an expander die. Redding leaves it out because most popular progressive machines flare the case mouth at the powder drop station. If you plan to run these on a single stage or turret press, you'll want to pick up a separate expander die.
Do I need case lube with the carbide sizing die?
No lube needed. The titanium carbide insert in the sizing die is slick enough that your brass glides right through without any sizing lube. That saves you a messy step and keeps your workflow moving.
What kind of crimp does this 380 Auto set use?
It comes with a taper crimp die. Since 380 Auto headspaces on the case mouth, a taper crimp is the correct choice and helps with reliable feeding. Seating and crimping happen in separate dies, which helps keep your overall length consistent.
Is a shellholder included with this die set?
No, the shellholder is sold separately. You'll need the correct shellholder for 380 Auto to run these dies. The set uses standard 7/8-14 threads, so it fits common presses without any adapters.



Reviews
There are no reviews yet.