0
0

Hornady 38 Special / 357 Magnum Expander Die (.357)

UPC: 090255044591

$30.99

19 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the standalone Hornady expander die for the .357 family of cases, covering 38 Special, 357 Magnum, and 357 Remington Maximum. Its one job is to put a slight bell or flare on the case mouth after sizing so your bullet can start square and slide into the seating die without shaving lead or deforming the base. If you reload cast bullets or just want cleaner, more concentric handgun ammo, a dedicated expander step is the difference between a smooth seating stroke and a frustrating one.

What the .357 Expander Die Actually Does

Once a case has been sized and deprimed, running it into this die opens up the mouth just enough to accept a .357 diameter bullet. The goal is a very light flare, only enough for the bullet to catch and hold before it heads into the seater. Too much bell works the brass unnecessarily, so the sweet spot is just a hair of flare. This die threads into any standard press using the universal 7/8"-14 thread, so it drops right into Hornady, RCBS, Lee, Lyman, and other common setups.

Why a Separate Expander Die Is Worth It

If you bought a Hornady die set, the expander comes with it, but when you shift to a progressive press, build a custom tool head, or simply wear one out, having the single die on hand keeps you running. The Zip Spindle design uses a series of fine threads on the spindle and collet that eliminate slippage and make tightening the spindle lock far easier during adjustment. That means once you dial in your flare, it stays put.

This die carries Hornady's reputation for machining and their lifetime guarantee against breakage or wear under normal use. Whether you are loading plinking 38s, heavy 357 Magnum hunting loads, or feeding a cowboy action gun, this is the piece that gets your brass ready for a clean bullet seat every time.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044591
  • UPC: 090255044591
  • Die Type: Expander Die
  • Calibers: 38 Special, 357 Magnum, 357 Remington Maximum
  • Expander Diameter: .357
  • Thread Size: 7/8"-14
  • Spindle Design: Zip Spindle
  • Quantity: 1 die
  • Country of Origin: USA

What’s Included

  • 1 Hornady .357 expander die (38 Special / 357 Magnum / 357 Maximum)

Frequently Asked Questions

Which calibers does this Hornady expander die work with?

It is set up for the .357 bullet diameter family, which covers 38 Special, 357 Magnum, and 357 Remington Maximum. Any of those straight-wall cases can be flared with this single die. It opens the mouth to accept a standard .357 handgun bullet.

Will the 357 Magnum expander die fit my press?

Yes, it uses the standard 7/8"-14 thread found on nearly all single-stage and turret presses. That means it threads right into Hornady, RCBS, Lee, Lyman, and most other common presses. No adapter is needed for a standard press.

Do I need this if I already have a Hornady die set?

Not necessarily, since the three-die sets already include the expander. This standalone die is handy if you run a progressive or dedicated tool head, want a backup, or need to replace one. Plenty of reloaders also pick up the single die to add an expanding step to another brand's die lineup.

How much should I flare the case mouth with this die?

Just enough for the bullet to start straight and hold in place before it enters the seater. A light flare is all you want, since over-belling works the brass harder and shortens case life. Adjust the die down in small increments and check with a bullet until it catches cleanly.

Additional information

UPC

090255044591

Manufacturer

Manufacturer Part Number

044591

Reviews

There are no reviews yet.

Be the first to review “Hornady 38 Special / 357 Magnum Expander Die (.357)”