Description
If you're loading straight-walled revolver brass, the expander step is where a lot of frustration starts. Shave a bullet here, run inconsistent neck tension there, and your whole batch suffers. This Hornady expander die takes that worry off the table by putting a uniform bell on the case mouth so projectiles start straight and seat without catching. It covers .38 Special, .357 Magnum, and .357 Maximum, which makes it a handy single die if you load across that family of cartridges.
What the 357 Magnum Expander Die Does on the Press
The job here is simple but important. The die flares, or belles, the mouth of the case just enough to accept a bullet cleanly while setting proper neck tension so the round holds together under recoil. The one-piece solid expander spindle is built to resist bending and breaking, and it self-centers inside the die body for tight, repeatable tolerances. That consistency is what keeps your seating depth uniform and cuts down on lead shaving when you're running cast or jacketed bullets.
Why Reloaders Reach for This Hornady Expander Die
This is part of Hornady's Custom Grade New Dimension line, made from select heat-treated steel and backed by the company's lifetime guarantee against breaking or wearing out from normal use. It ships with the Sure-Loc lock ring, which clamps around the full die body to hold your setting in place. The locking screw tightens without touching the threads, so you won't bugger up the die when you adjust it, and the wrench flats make swapping it in and out painless.
Fit and Setup for the 38-357 Expander Die
The die uses standard 7/8-14 threads, so it drops right into any press that accepts common dies, and it works with Hornady's Lock-N-Load bushing system if you run one. Keep in mind it does not include a shell holder, so you'll want the correct holder for your .38/.357 brass on hand. Pair it with your sizing and seating dies and you've got a smooth, reliable loading bench for one of the most popular revolver rounds out there.
Key Specifications
- Manufacturer: Hornady
- Product Line: Custom Grade New Dimension
- Die Type: Expander Die (Pistol Style)
- Calibers: .38 Special / .357 Magnum / .357 Maximum
- Expander Diameter: .357 in
- Thread: 7/8-14 standard
- Spindle: One-piece solid expander spindle
- Lock Ring: Sure-Loc lock ring included
- Lock-N-Load Compatible: Yes
- Manufacturer Part Number: 044523
- Model/Item: 56150
- UPC: 090255445237
What’s Included
- Hornady Pistol Style Expander Die (.357 / 38-357-357 Max)
- Sure-Loc Lock Ring
- Plastic storage case
Frequently Asked Questions
What calibers does this Hornady expander die work with?
It's designed for straight-walled .38 Special, .357 Magnum, and .357 Maximum brass. The single die covers all three, so you can flare case mouths across that cartridge family with one tool. It works with cast and jacketed bullets alike.
Does the 38 Special/357 Magnum expander die come with a shell holder?
No, a shell holder is not included with this die. You'll need the correct shell holder for .38 Special/.357 Magnum to run it on your press. It does come with the Sure-Loc lock ring and a plastic storage case.
Will this die fit my reloading press?
Yes, it uses standard 7/8-14 threads, so it fits any press that accepts common dies. It's also compatible with Hornady's Lock-N-Load bushing system if you use one. No special adapters are needed.
What exactly does the expander die do in the reloading process?
It opens up and puts a slight bell or flare on the case mouth so the bullet starts straight and seats without shaving. This also sets proper neck tension to keep the bullet secure under recoil. It's the step between sizing and seating on straight-wall pistol brass.



Reviews
There are no reviews yet.