Description
Hornady's Cowboy-grade dies were designed with the lead bullet crowd in mind, and this three-die set covers .38 Special, .357 Magnum, and .357 Maximum all in one box. If you shoot cowboy action, plink with cast bullets, or just want a clean-feeding setup for your revolver loads, this is the set built for that exact job. It includes a full-length sizing die, an adjustable case mouth expander die, and a seater die with roll crimp.
What Makes the Cowboy 38/357/357 Max Set Different
The big story here is how gentle it is on soft lead. The expander die opens the case mouth just enough to drop a cast bullet in without shaving or deforming it, and the seater is shaped to press lead bullets home without smearing the nose or the driving bands. That matters a lot when you're loading soft alloy projectiles that a standard jacketed-style seater can chew up. The full-length sizing die carries a titanium nitride coated sizing ring, which cuts down on friction and helps your brass slide through smooth.
Build Quality You'd Expect From Hornady Dies
These carry the same machining Hornady puts in their custom-grade dies. The internal profiles are polished to a smooth finish so cases don't stick or drag, and the Sure-Loc lock rings clamp evenly around the die body and hold their setting without the locking screw ever touching the threads. Hornady backs their dies with a guarantee against breaking or wearing out from normal use, so once you dial this set in it should keep running for years.
Loading 38, 357, and 357 Max With One Set
Because all three cartridges share the same .357 bullet diameter and case body, one die set handles the whole family. You adjust seating depth and crimp for the case length you're running, whether that's short .38 Special brass or longer .357 Maximum. That makes it a handy pickup if you already own more than one of these revolvers or lever guns and want to keep one setup on the bench for all of them.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546528
- UPC: 090255565287
- Calibers: .38 Special / .357 Magnum / .357 Maximum
- Bullet Diameter: .357 in
- Die Type: Cowboy Grade, 3-Die Set
- Dies Included: Full-length sizing, case mouth expander, seater with roll crimp
- Sizing Ring: Titanium nitride coated
- Lock Rings: Sure-Loc
- Designed For: Cast / lead bullet reloading
- Crimp Type: Roll crimp
What’s Included
- Full-length sizing die with titanium nitride sizing ring
- Case mouth expander die
- Seater die with roll crimp
- Sure-Loc lock rings
- Plastic storage case
Frequently Asked Questions
What calibers does the Hornady Cowboy 3-die set cover?
This set loads .38 Special, .357 Magnum, and .357 Maximum. All three share the same .357 bullet diameter and case body, so one die set handles the whole family. You just adjust seating depth and crimp for the case length you're working with.
Is this die set made for lead bullets?
Yes. The Cowboy dies were designed specifically for cast and lead bullet reloaders. The expander and seater are shaped to feed and seat soft lead projectiles without shaving or deforming them, which is exactly what you want for cowboy action and cast plinking loads.
Does the Hornady Cowboy set include a crimp die?
The crimp is built into the seater die, which applies a roll crimp as it seats. That means you get sizing, expanding, seating, and crimping across the three dies without needing a separate crimp die on your press.
Will these dies work with jacketed bullets too?
The set is tuned for lead and cast bullets, so that's where it shines. You can run it with other bullets, but the expander and seater geometry were built around soft lead, and that's what it does best.




Reviews
There are no reviews yet.