0
0

Forster Ultra Micrometer Seater Die 375 H&H Magnum U00134

UPC: 757253006722

$118.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload the 375 H&H Magnum, you already know that getting consistent, concentric rounds out of a big belted case takes the right tools. Forster's Ultra Micrometer Seater Die is built to do exactly that, combining the brand's proven straight-line bench rest design with a precision micrometer head that takes the guesswork out of seating depth.

The heart of this die is a spring-loaded sliding chamber that fully captures the case before the bullet is ever seated. Instead of supporting only the case rim or neck like a lot of competing designs, the Forster chamber supports the full outside diameter of the sized case and holds the bullet, case, and seating stem on a common axis. The result is press-fit seating with very little runout, which is what you want when you're loading for accuracy at long range or on a big-game hunt. It's a non-crimping seater, so the bullet and case stay in perfect alignment the whole way through the stroke.

Why the Micrometer Head on This 375 H&H Die Matters

The micrometer adjustment lets you set seating depth in .001 inch increments, and you can fine-tune down to roughly .0005 inch in either direction. Bright white markings make the dial easy to read and record, so once you've found your rifle's sweet spot near the lands, you can write that number down and dial right back to it next time you switch bullets. That alone saves a pile of trial and error.

Build Quality You'd Expect From a Forster Seater

Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating. It also ships with Forster's Cross Bolt Die Lock Ring, which clamps around the entire die body rather than digging a screw into the threads, so your setting holds and your die threads stay undamaged. For the handloader chasing tight groups out of a 375 H&H, this is a tool that earns its place on the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 375 H&H Magnum
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Number of Dies: 1
  • Seating Adjustment: .001 inch increments, fine-tune to approximately .0005 inch
  • Style: Non-crimping, straight-line seater
  • Chamber: Spring-loaded sliding die chamber supporting full case diameter
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Material: Hand-polished, heat-treated steel
  • Country of Origin: Made in USA
  • Manufacturer Part Number: U00134
  • UPC: 757253006722

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • Forster Cross Bolt Die Lock Ring (split type)
  • Storage case
  • Instructions

Frequently Asked Questions

How precise is the seating depth adjustment on this 375 H&H die?

The micrometer head is marked in .001 inch increments and lets you fine-tune down to about .0005 inch in either direction. The bright white markings are easy to read and record, so you can note your rifle's best setting and dial right back to it. That makes switching between bullets or fine-tuning toward the lands quick and repeatable.

Does this Forster Ultra Micrometer Seater Die crimp the case?

No. This is a non-crimping, straight-line seater that holds the bullet and case in alignment through the entire seating stroke. The only Forster seater that applies a crimp is the 30-30 Winchester version, which is set up that way for lever actions.

Will this die work in my press, or do I need a Forster Co-Ax?

It uses standard 7/8-14 threads, so it works in common single-stage and turret presses. If you run it in a non-Forster press, use the shellholder recommended by your press manufacturer. If you're on a Forster Co-Ax, no shellholder is needed since those presses don't use one.

Can this seater handle long, high-BC bullets?

Yes. The standard seating stem has plenty of clearance and contacts the bullet on the ogive rather than the tip, so it works well with VLD and other long, high-BC designs. Handloaders report clean seating with no marks left on the bullet nose.

Additional information

UPC

757253006722

Manufacturer

Manufacturer Part Number

U00134

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die 375 H&H Magnum U00134”