0
0

Lee Precision .375 H&H Magnum Collet Neck Sizing Die Only

UPC: 734307910259

$22.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck sizing is one of those quiet little tricks that separates fussy reloaders from everyone else, and the Lee .375 H&H Magnum collet die makes it about as painless as it gets. Instead of dragging an expander ball through the neck like a standard die, this one uses a steel collet to squeeze the fired case neck down onto a precision mandrel. The result is a case neck that's sized evenly from top to bottom with very little runout, which is exactly what you want when you're chasing tight groups out of a big-bore bolt gun.

How the .375 H&H Collet Die Earns Its Keep

Because this die only works the neck and leaves the body fire-formed to your chamber, your brass stays matched to your rifle and lasts noticeably longer. That means fewer trims, fewer case failures, and more reloads out of each piece of expensive .375 brass. It deprimes while it sizes, and since there's no body sizing happening, you can skip the case lube entirely. No lube means no sticky mess to wipe off afterward, which is a real time saver when you're running a batch.

Getting the Most Out of Your .375 H&H Magnum Neck Sizing Die

Many reloaders find they get rounder, more concentric necks by sizing the case, backing it off about an inch, rotating it an eighth of a turn, then sizing again. That little trick spreads the collet's grip across the high spots of the neck. Neck tension on these dies isn't adjusted mechanically, but experienced hands will tune it by lightly reducing the mandrel diameter or ordering a different mandrel if they want to fine-tune bullet grip.

This is strictly a neck sizing die, so it's meant for brass that's been fired through your own rifle. It threads into any standard 7/8-14 reloading press, so it drops right into most single-stage setups you've already got on the bench.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91025
  • UPC: 734307910259
  • Cartridge: .375 H&H Magnum
  • Die Type: Collet Neck Sizing Die
  • Thread Size: 7/8-14
  • Gun Type: Rifle
  • Lubrication: None required
  • Deprimes Case: Yes
  • Country of Origin: United States

What’s Included

  • Lee .375 H&H Magnum collet neck sizing die

Frequently Asked Questions

Does the .375 H&H Magnum collet die need case lube?

No, it requires no case lubrication. Because the collet only sizes the neck and squeezes it against a mandrel, there's no expander ball being dragged through and no lube needed. That keeps your brass clean and saves you the cleanup step afterward.

Can I use this die with any brass, or only cases fired in my rifle?

This die is recommended for brass that's been fired through your own firearm. Since neck sizing leaves the case body fire-formed to your chamber, it works best when the cases are matched to the rifle they came from. If you're loading new or mixed range brass, you'd want a full length sizing die instead.

What thread does the Lee .375 H&H collet die use?

It uses the standard 7/8-14 thread, so it fits the vast majority of single-stage reloading presses on the market. You can thread it straight into your existing press without any adapters.

Does the collet die deprime the case too?

Yes, it deprimes the case while it sizes the neck, so that step is handled in one stroke. Keep in mind this is a neck sizing die only and does not seat bullets, so you'll still want a seating die to finish your rounds.

Additional information

UPC

734307910259

Manufacturer

Manufacturer Part Number

91025

Reviews

There are no reviews yet.

Be the first to review “Lee Precision .375 H&H Magnum Collet Neck Sizing Die Only”