$17.60
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run an L.E. Wilson case trimmer and load for the 375 H&H Magnum, this is the holder that locks your brass in place for clean, consistent trims. Machined from steel and built to tight tolerances, it grips the case by its body taper the same way a rifle chamber does, so every cut comes out square and uniform. L.E. Wilson has been building these holders and their trimmers since the 1930s, and this one carries that same made-in-the-USA reputation.
Using it is about as simple as reloading gear gets. You drop your case into the holder, give the case head a firm tap on the bench to seat it snug against the internal taper, then slide the holder onto the trimmer bars against the depth stop. That body-taper fit is the whole trick here. It keeps the case perfectly aligned with the cutter head, which means you're not fighting runout or inconsistent lengths. Pop the finished case back out with a quick tap on the mouth.
The 375 H&H is a long, tapered belted cartridge, and that taper is exactly why a chamber-style holder shines with it. The brass seats deep and holds firm while the neck stands clear for trimming. Beyond trimming, this holder pulls double duty with the L.E. Wilson deburring and reaming tools, so it earns its spot on the bench if you're doing primer pocket or neck work on your 375 brass.
Keeping your 375 H&H cases trimmed to a consistent length matters for reliable chambering and even neck tension, especially on a big-game cartridge you want to perform when it counts. Pair this holder with a Wilson trimmer and you've got a setup that'll turn out uniform brass load after load.
It holds your 375 H&H Magnum brass securely while you trim it on an L.E. Wilson case trimmer. The holder cradles the case by its body taper, much like a rifle chamber, so the case stays in perfect alignment with the cutter for square, repeatable trims. It also works for deburring and reaming tasks with the matching Wilson tools.
Yes, this holder is designed to be used with the L.E. Wilson case trimmer and is sold separately from the trimmer itself. It drops onto the trimmer bars and seats against the depth stop. Some reloaders adapt Wilson holders for other setups thanks to their tight tolerances, but you'll get the best results with a Wilson trimmer.
Place the case in the holder and tap the case head firmly on your bench so it seats against the internal taper. Then set the holder onto the trimmer, hold it against the depth stop, and turn the crank to trim. When you're done, a quick tap on the case mouth pops the brass right back out.
The chamber-style fit works by matching the case body taper, and the 375 H&H has plenty of taper to seat well. In practice many reloaders trim both fired and resized brass as long as the case mouth stands clear of the holder for the cutter to reach. If you want the exact fit for a specific brass condition, it's worth checking the L.E. Wilson case holder chart.
| UPC | 815145020673 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-375HH |
You must be logged in to post a review.
Reviews
There are no reviews yet.