$121.99
49 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Your optic is only as good as what holds it in place, and the Leupold Mark 4 35mm Medium rings take that job seriously. This is a matched pair of aluminum rings in a matte Flat Dark Earth finish, built to clamp any riflescope with a 35mm main tube to a standard Picatinny rail. The cross-slot design is the same one Leupold has leaned on for years, cut to tight tolerances so your scope sits where you put it and stays there.
Aluminum construction keeps the weight down to roughly 3.6 ounces for the pair, which matters when you're already hanging a heavy 35mm optic off the rifle. The medium height gives you an optical centerline around 1.06 inches, leaving room for mid-to-large objective bells to clear the barrel and rail while still letting you settle into a solid cheek weld. That combination makes these a natural fit for precision rigs, tactical builds, and hunting setups running larger glass.
Installation follows the usual Leupold cross-slot routine. Drop the cross bolts into your rail slots, push the rings forward so they seat against the slot, and snug the keeper nuts to 65 inch-pounds. Once your scope is leveled and your eye relief is dialed, bring the ring cap screws down in a crisscross pattern to 28 inch-pounds, keeping the gap even on both sides. A torque wrench and a scope leveling tool make the whole process painless and repeatable.
Beyond matching the FDE furniture a lot of folks are running these days, the matte finish knocks down glare so you're not throwing off reflections in the field. It's a practical touch on a ring set that's really about one thing: keeping the link between your scope and your rifle rock solid. Made in the USA, these rings carry the Mark 4 name for a reason.
These rings are built for riflescopes with a 35mm main tube. If your optic has a 1-inch or 30mm tube, you'll want a different size in the Mark 4 lineup. Double-check your scope's tube diameter before ordering so you get the right fit.
Yes. The Mark 4 uses a cross-slot design that drops onto a standard Picatinny rail, so they'll fit the rail on most modern bolt guns, AR-pattern rifles, and chassis systems. Just slide the cross bolts into your rail slots and torque them down.
Leupold calls for 65 inch-pounds on the keeper nuts that clamp the rings to the rail, and 28 inch-pounds on the ring cap screws that hold the scope. Tighten the cap screws evenly in a crisscross pattern to keep the gap balanced. A calibrated torque wrench is the way to go here.
Medium rings put the optical centerline around 1.06 inches, which clears most mid-to-large objective bells on a Picatinny rail. For very large objectives or oversized bells you may want to compare against the high or super-high options in the series. Measuring your objective clearance ahead of time takes the guesswork out of it.
| UPC | 030317040468 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 185236 |
| Color | Flat Dark Earth |
| Length | 0.64 |
| Model | |
| Mount Type | Picatinny Rail |
| Package Height | 0.8 |
| Package Width | 4.7 |
| Product Type | Accessory-Rings/Mounts/Bases |
| Shipping Weight | 0.295 |
You must be logged in to post a review.
Reviews
There are no reviews yet.