$38.72
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're loading 35 Whelen and want your resized brass to chamber the same way every time, this is the little tool that makes it happen. The L.E. Wilson Case Gage is a one-piece, non-adjustable steel cylinder machined to the minimum SAAMI chamber dimensions for the 35 Whelen. You drop a case in, and the gage shows you exactly where your shoulder sits and whether the case mouth is sitting inside the min and max trim steps. No calipers required for a quick check, though you can absolutely use a depth mic for finer numbers.
Two things matter most when you're sizing bottleneck brass: headspace and overall case length. This gage handles both. The top of the gage reads min/max headspace, letting you see how far back you're pushing the shoulder when you resize. The case length step tells you when your brass has stretched past max and needs a trip to the trimmer. Worth knowing up front: it reads datum-to-head and overall length, not body diameters.
The trick that separates good reloaders from frustrated ones is measuring your brass in as-fired condition first, before you ever touch the sizing die. That gives you a baseline for your specific chamber, since no two chambers headspace exactly alike. From there you resize, drop the case back in, and dial your die until you're bumping the shoulder back just a thousandth or two. That keeps pressure in check and stops the case-head separation that comes from over-working brass.
L.E. Wilson has been building these gages since 1935, and they've stayed a bench staple for a reason. Founder Sam Wilson invented the design after helping a fellow handloader chase down a case-separation problem, and the family-run shop out of Washington has been machining them in the USA ever since. For a cartridge like the 35 Whelen that thrives on carefully prepped brass, having a dedicated gage on the bench is one of the smarter small investments you can make.
It checks headspace (the datum-to-head length based on your case shoulder) and overall case length to tell you when brass needs trimming. The top of the gage reads min and max headspace, while the stepped end shows whether your case length falls inside the trim window. It does not measure case body diameters.
No, this is the standard one-piece, non-adjustable steel gage machined to the minimum SAAMI chamber dimensions for 35 Whelen. The adjustable style is designed for belted magnum cartridges, which the 35 Whelen is not. For a rimless case like the Whelen, this fixed gage is exactly what you want.
Not for a basic check. You can drop a case in and eyeball the min/max steps to confirm you're within spec. If you want precise shoulder setback numbers when tuning your sizing die, a case gage depth micrometer or caliper gives you exact readings.
Measure a fired case first to get a baseline for your chamber, then resize and drop the case back into the gage. Adjust your die until you're bumping the shoulder back only a thousandth or two below the as-fired reading. That approach keeps headspace safe and extends the life of your 35 Whelen brass.
| UPC | 857949005715 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CG-35WLN |
You must be logged in to post a review.
Reviews
There are no reviews yet.