$11.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Redding #35 Shellholder is the piece that holds your case steady through every pull of the press handle, from full-length sizing and decapping to seating bullets. It's built for the big magnum family, covering cartridges like 338 Lapua Magnum, 416 Rigby, 300 Lapua Magnum, 300 Pegasus, 300 Baer, 330 Baer, 30-338 Lapua Magnum, and 30-416 Rigby Improved. If you're loading any of those rimless beltless magnums, this is the correct snap-in holder for the job.
Redding machines these to tight tolerances so the case head sits square and secure, which keeps your sizing and seating consistent round after round. The steel is heat treated for durability, and the outside knurling gives you a grippy surface that makes swapping holders quick even with slick or oily fingers.
This universal snap-in design is recommended for use with Redding dies and presses, and it also works in most other popular press brands, including single stage and turret setups. That versatility matters if you run more than one press or own a mixed bench of gear, since the #35 will move between them without fuss. Double-check your cartridge against the fitment list before ordering, because shellholder numbers are matched to specific case head sizes.
The large magnum cases this holder serves generate serious pressure, so a holder that keeps the rim locked flat and true is worth getting right. Precise machining helps the ram do its work without the case shifting or tilting, and that translates directly into straighter ammo and better repeatability on the target. It's a simple, long-lasting tool that earns its spot in the toolbox and holds up for the life of your press.
This is the standard single shellholder, not the Competition set. If you want to fine-tune shoulder bump with shims, that's a separate Redding product, but for everyday loading of these big magnums the #35 is all you need.
The #35 is sized for large magnum cases including 338 Lapua Magnum, 416 Rigby, 300 Lapua Magnum, 300 Pegasus, 300 Baer, 330 Baer, 30-338 Lapua Magnum, and 30-416 Rigby Improved. These cartridges share a similar case head diameter, which is why one holder covers the group. Always confirm your specific cartridge against the fitment list before buying.
Yes. Redding uses a universal snap-in design that fits Redding presses and dies as well as most other popular brands. It works with single stage and turret presses, so it should drop into the gear you already have on the bench.
This is the standard single #35 shellholder (part 11035). The Redding Competition Shellholder Set is a separate five-piece kit built in .002 inch increments for adjusting shoulder bump. If you just need a reliable holder for loading these magnums, the standard #35 is what you want.
The outside knurling gives you a textured grip so the holder is easy to grab and change out, even when your hands are a little oily from lube. Combined with the heat-treated steel, it makes for a tool that is quick to swap and built to last the life of your press.
| UPC | 611760110351 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 11035 |
| Style | Press Type |
You must be logged in to post a review.
Reviews
There are no reviews yet.