Description
If you're building out a precision rifle or getting a hunting rig dialed in, your rings matter just as much as the glass sitting in them. The MDT Premier 34mm rings give you a clean, repeatable mount without the usual fuss. These are the high height version at 1.25 inches, machined from billet 6061 aluminum with a black anodized finish, and they ship as a matched pair for any 34mm scope tube.
What sets these apart is the NATO spec interface. MDT builds the Premier rings to the STANAG 4694 standard, which means each ring sits tight against the top of the rail while pressure clamps down on the angled surfaces underneath. That gives you more contact area than a typical rail mount and better alignment repeatability, which is a nice way of saying your zero stays put. The design also plays well with Picatinny and multi-slot bases, including out-of-spec rails.
What Makes the MDT Premier 34mm Rings Hold
Each ring uses four oversized #8-32 Grade 8 fasteners to clamp the scope, so you've got plenty of even clamping force spread across the tube. Every set is CMM checked to 1.5 millionths of an inch, which is why no lapping is required. You pull them out of the package, mount up, and you're good. The stepped base-to-cap interface lets you snug down the fasteners on one side first, then make your final alignment tweaks before locking everything in.
Lightweight Build Without Giving Up Strength
The whole appeal here is a mount that won't add dead weight to a backcountry rifle or a match gun you're rucking around all day. The set runs right around 4 to 5.6 ounces depending on how it's measured, and the aluminum construction keeps things trim while the Grade 8 hardware carries the load. Whether you're chasing big game, ringing steel, or just getting your rifle sorted at the bench, these rings handle recoil from heavy calibers and keep the optic sitting right where you set it.
Key Specifications
- Manufacturer: MDT
- Model: Premier
- MPN: 103549-BLK
- UPC: 709951103784
- Tube Diameter: 34mm
- Ring Height: High (1.25")
- Material: Billet 6061 Aluminum
- Finish: Black Anodized / Matte
- Base Fit: Picatinny / Multi-Slot
- Spec: STANAG 4694 (NATO Spec)
- Fasteners: Four oversized #8-32 Grade 8 per ring
- Precision: CMM checked to 1.5 millionths of an inch
- Ring Quantity: Pair (2 rings)
- Country of Origin: Canada
What’s Included
- Pair of MDT Premier 34mm high scope rings (2 rings)
- Ring cap and clamping fasteners
Frequently Asked Questions
Do the MDT Premier rings require lapping before mounting?
No lapping needed. Each set is CMM checked to 1.5 millionths of an inch precision, so the rings come matched and ready to mount. You can install your scope straight out of the package and trust the fit.
What are the torque specs for the MDT Premier scope rings?
MDT recommends 25 to 30 inch-pounds on the clamp-to-rail screws and 15 to 22 inch-pounds on the ring cap screws. Make sure each ring is firmly seated against the rail before you torque the clamp screws. Always defer to your optic manufacturer's final torque value for the cap screws.
What size scope and base do these rings fit?
These are sized for a 34mm scope tube at high height, which gives you 1.25 inches of clearance. They're built to the STANAG 4694 NATO spec, so they clamp onto Picatinny and multi-slot bases and will even mount to out-of-spec rails.
Will the MDT Premier rings hold zero under heavy recoil?
Yes. The NATO spec interface puts more contact area against the rail than a standard mount, and four oversized Grade 8 fasteners per ring clamp the scope evenly. That combination keeps your optic from shifting even with larger calibers and extended round counts.




Reviews
There are no reviews yet.