Description
The American Defense AD-RECON is built to put high-power optics on a flattop style AR-15 and keep them there. This one runs 34mm rings, a 0 MOA base, and a Flat Dark Earth finish, with the standard lever for a clean, low-profile locking setup. The whole mount is CNC machined from a solid block of 6061-T6 aluminum and finished in T3 Mil-Spec hard coat anodize, so it holds up to real range time and rough handling without complaint.
What the AD-RECON Cantilever Design Gets You
The 2-inch forward cantilever is the whole point here. It throws the scope out over the handguard so you can dial in the correct eye relief and get a comfortable, heads-up shooting position behind your optic. The standard-height base sits at a 1.550" centerline with 34mm rings, which is the go-to height for most LPVO and precision setups on an AR. It clears objective housings up to 56mm, so you've got room for big glass.
QD Auto Lock and the FDE AD-RECON Mount
The patented QD Auto Lock lever system is what sets this mount apart. It tensions itself to the rail, so it grabs onto both in-spec and out-of-spec Picatinny rails without any fuss, and it returns to zero when you pop it off and back on. No proprietary tools needed either, you can adjust the tension with your fingers or a flat-blade screwdriver, and the lever can be set to lock forward or rearward depending on your layout.
Rings and Fit on the 34mm AD-RECON
The AD-RECON uses vertically split rings that are precision machined and self-centering, so there's no lapping required to get a true, stress-free hold on your scope tube. Those rings are also interchangeable down the road, meaning if you jump to a different tube size later you can swap the ring set instead of buying a whole new mount. It's a lightweight, American-made piece backed by ADM's lifetime warranty, and it earns a spot on everything from duty-style builds to precision range rifles.
Key Specifications
- Manufacturer: American Defense Mfg
- Model: AD-RECON
- Manufacturer Part Number: AD-RECON-34-FDE-STD
- UPC: 818503010651
- Ring Size: 34mm
- Built-in MOA: 0 MOA
- Cantilever Offset: 2 inches forward
- Centerline Height (34mm rings): 1.550"
- Lever Style: Standard QD Auto Lock
- Finish: Flat Dark Earth, T3 Mil-Spec Hard Coat Anodize
- Material: 6061-T6 Aluminum
- Max Objective Clearance: Up to 56mm
- Weight: 8.4 oz
- Mount Type: Picatinny Cantilever
- Country of Origin: Made in USA
- Warranty: Lifetime
What’s Included
- AD-RECON 34mm 0 MOA cantilever scope mount with integrated QD Auto Lock lever
- 34mm rings with mounting hardware
Frequently Asked Questions
What rifles does the AD-RECON cantilever mount work best on?
It's designed for flattop style AR-15 rifles with a full-length Picatinny top rail. The 2-inch forward cantilever pushes your scope out over the handguard so you get proper eye relief on the AR platform. The standard 1.550" height is a solid all-around fit for most LPVO and magnified optic builds.
Will this 34mm mount return to zero if I take it off?
Yes. The patented QD Auto Lock lever system is built to give you a repeatable return to zero when you remove and reinstall the mount. The lever tensions itself to the rail so it clamps consistently every time.
Does the AD-RECON fit both in-spec and out-of-spec rails?
It does. The QD Auto Lock system is designed to grab onto both in-spec and out-of-spec Picatinny rails. You can fine-tune the tension by hand or with a flat-blade screwdriver, no proprietary tools required.
How big of an objective lens will this mount clear?
The standard-height AD-RECON clears scope objective housings up to 56mm. That gives you plenty of room for most large-objective LPVOs and precision optics. If you need even more clearance for a laser or a higher cheek weld, ADM also offers taller M and H height versions.




Reviews
There are no reviews yet.