Description
Anyone chasing accuracy with the 338 Lapua Magnum knows seating depth is one of the biggest levers you can pull. This Lee Precision Micrometer Bullet Seating Die replaces the old measure-rotate-check-repeat routine with a laser-engraved micrometer head that reads in .001 inch increments, just like a depth micrometer. You can fine-tune your seating depth, write down the number, and return to that exact setting whenever you load the next batch.
What Sets the 338 Lapua Micrometer Seater Apart
The real magic is the floating bullet guide. It holds the case mouth and bullet in alignment as the bullet travels into the neck, which keeps everything concentric and translates to measurably less bullet runout on the finished round. For a cartridge built around high-BC projectiles and long-range work, that consistency shows up on paper at distance. The seating stem is machined and burnished so it seats nearly any point style bullet without leaving marks or scuffing the ogive.
Dead Length Seating and Setup
Run as a dead length seater, the die body contacts the shell holder on every stroke, which gives you uniform seating depth round after round. The micrometer head uses a fine thread and holds its setting well, so you are not fighting drift mid-session. Keep in mind this die is a bullet seater only and does not crimp. If you want to add a crimp for heavier recoiling loads or tube-fed applications, pair it with a Lee Factory Crimp Die for the 338 Lapua.
Built for the Big Lapua Case
Because of the large case head on the 338 Lapua Magnum, this die uses the oversized 1-1/4 x 12 thread rather than the common 7/8 x 14, so it drops into presses set up for the big magnum family. It is made in the USA and backed by Lee's reputation for giving reloaders serious precision without the premium price tag. For handloaders working up match or hunting loads, it is a straightforward upgrade that takes the guesswork out of seating depth.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92294
- UPC: 734307922948
- Cartridge: 338 Lapua Magnum
- Die Type: Precision Micrometer Bullet Seating Die
- Adjustment: Laser-engraved micrometer, .001 inch increments
- Seating Style: Easy adjust dead length
- Bullet Guide: Floating bullet guide for reduced runout
- Thread Size: 1-1/4 x 12
- Crimp: No crimp; seating only
- Country of Origin: Made in USA
What’s Included
- 338 Lapua Magnum Precision Micrometer Bullet Seating Die
- Lock ring
- Storage box
Frequently Asked Questions
Does the 338 Lapua micrometer seating die crimp the case?
No, this is a bullet seating die only and does not apply a crimp. If you want to crimp your 338 Lapua loads, you will need to add a separate Lee Factory Crimp Die for the cartridge. Many precision handloaders skip the crimp entirely for match ammo, so it depends on your intended use.
What makes the micrometer version better than a standard Lee seating die?
The micrometer head is laser engraved in .001 inch increments, so you can record a setting and return to it exactly instead of adjusting by feel. It also adds a floating bullet guide that keeps the case and bullet aligned for lower runout. Together those features make dialing in and repeating seating depth much faster and more consistent.
Will this die fit a standard reloading press?
The 338 Lapua Magnum has a large case head, so this die uses the oversized 1-1/4 x 12 thread rather than the common 7/8 x 14. It works in presses set up for the big magnum family of cartridges. Check that your press accepts the larger thread before ordering.
Can the seating stem handle different bullet shapes?
Yes. The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the tip. That makes it versatile across the various match and hunting projectiles reloaders run in the 338 Lapua.




Reviews
There are no reviews yet.