0
0

Redding 338 Lapua Magnum Full Length Sizing Die (91594)

UPC: 611760915949

$73.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for a 338 Lapua Magnum and want brass that chambers right every time, this Redding full length die handles the heavy lifting. It resizes the entire case body, shoulder, and neck down to minimum chamber dimensions while the decapping rod punches out the old primer in the same pull of the handle. That means one stroke does the sizing and depriming, which keeps your workflow moving when you're running a big batch of magnum brass.

What the Redding 338 Lapua Die Brings to the Bench

This is a single full length sizing die, part number 91594, from Redding's conventional Series A lineup. It ships with a complete decapping rod assembly and neck expander, or size button, which sets consistent neck tension on your 338 brass as the case comes back out of the die. Redding builds these from the finest alloy steel they can get and heat treats them in atmospherically controlled furnaces, so the die holds its dimensions through a lot of hard use. The sizing surfaces are hand polished to cut down on the effort it takes to work full length magnum cases.

Fit and Setup for the 338 Lapua Magnum Full Length Sizing Die

The die uses the industry standard 7/8-14 threaded body, so it threads straight into any standard single stage or turret press. You will need a shellholder to run it, and that's sold separately since it isn't part of this die. For the 338 Lapua, Redding spec's the #35 standard shellholder. Every die gets a final inspection and an ultrasonic cleaning before it's packed, and the box doubles as a handy loading block with a spot for your shellholder, the hex wrench, and a spare decapping pin.

For precision rifle and long range loading, Redding's reputation with this kind of die is well earned. Resized brass drops into a SAAMI chamber the way it should, and that consistency is what you're after when you're sending 338 downrange past a thousand yards.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 91594
  • UPC: 611760915949
  • Cartridge: .338 Lapua Magnum
  • Die Type: Full Length Sizing Die
  • Series: Series A (Conventional)
  • Thread Size: 7/8-14
  • Material: Heat Treated Alloy Steel
  • Bullet Diameter: 0.338 in
  • Recommended Shellholder: #35 (sold separately)
  • Country of Origin: United States
  • Quantity: 1 die

What’s Included

  • Full length sizing die
  • Decapping rod assembly with neck size button
  • Spare decapping pin
  • Hex wrench
  • Storage box that doubles as a loading block

Frequently Asked Questions

Does the 338 Lapua Magnum full length sizing die deprime the case too?

Yes. The die comes with a complete decapping rod assembly, so it resizes the full length of the case and pushes out the spent primer in the same stroke. You don't need a separate depriming step for this part of the process.

Do I need a shellholder with this Redding die?

You do, and it's not included with the die. For the 338 Lapua Magnum, Redding lists the #35 as the correct standard shellholder. It threads into any standard press using the 7/8-14 thread, so it'll work with the setup you already have.

Is this a bushing die or a conventional sizing die?

This is a conventional full length sizing die from Redding's Series A line, not a Type-S bushing die. It uses a fixed sizing diameter along with a neck size button to set neck tension rather than interchangeable bushings. If you want bushing-adjustable neck tension, that would be Redding's Type-S die, part number 77594, which is a different product.

Will this die work for a precision long range 338 Lapua build?

It will. Redding machines these on high precision lathes to tight tolerances and heat treats them for durability, and resized brass is built to fit any standard SAAMI chamber. For match or long range work, the consistent sizing is exactly what helps keep your rounds uniform.

Additional information

UPC

611760915949

Manufacturer

Manufacturer Part Number

91594

Reviews

There are no reviews yet.

Be the first to review “Redding 338 Lapua Magnum Full Length Sizing Die (91594)”