Description
If you've been neck sizing your 338 Lapua brass for a few firings and started noticing cases getting stiff to chamber, this is the tool that solves it. The Redding 338 Lapua Magnum Body Die full length sizes the case body and sets the shoulder back to the exact spot you need, while leaving the neck completely alone. That makes it a favorite among precision handloaders who want to control sizing instead of over-working their brass every single cycle.
Redding builds these dies with no internal moving parts, so there's no decapping rod or expander ball to deal with. You're simply working the body and shoulder, which keeps things simple and lets the brass last longer. The die uses the standard 7/8-14 thread so it drops right into any common single stage or turret press, and it ships with a lock ring so you can keep your setting dialed in session to session.
How the 338 Lapua Body Die Fits Your Reloading Bench
Most folks run this alongside a bushing neck die like a Redding Type S, letting the body die handle the shoulder bump and case body while the neck die does the neck work. You control how much shoulder setback you get by adjusting the die's position relative to the shellholder, and a datum or headspace comparator makes dialing in that .002 of bump a lot easier. Many precision reloaders pair it with Redding Competition Shellholders for repeatable, cam-over consistency between loading sessions.
What the Redding 338 Lapua Magnum Body Die Does for Accuracy
The real payoff here is straight ammo and brass that chambers smoothly without the stuck-case headaches that come from skipping full length work. By bumping the shoulder just enough and sizing the body back to chamber dimensions, you get reliable bolt close and extraction while keeping neck tension where you set it. It's a staple piece for 338 Lapua shooters who treat their brass like an investment and want every round to behave the same.
Made in the USA, this is quality Redding tooling that'll earn a permanent spot on your bench. Note that a shellholder is sold separately, so grab the #35 standard shellholder if you don't already have one.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 75594
- UPC: 611760755941
- Cartridge: .338 Lapua Magnum
- Die Style: Body Die
- Die Function: Full Length Body Size and Shoulder Bump
- Thread Size: 7/8-14
- Internal Parts: None (no decapping rod or expander)
- Bullet Diameter: 0.338 in
- Standard Shellholder: #35 (sold separately)
- Material: Steel
- Country of Manufacture: United States
What’s Included
- One Redding 338 Lapua Magnum Body Die
- Die lock ring
- Plastic storage box
- Instructions
Frequently Asked Questions
Does the Redding 338 Lapua Magnum Body Die size the case neck?
No, it leaves the neck untouched by design. The body die only full length sizes the case body and bumps the shoulder back for proper chambering. That's why most reloaders pair it with a bushing or neck sizing die to handle neck tension separately.
Do I need a shellholder with this body die?
Yes, and the shellholder is sold separately. The 338 Lapua Magnum uses the Redding #35 standard shellholder. Many precision reloaders also add a set of Redding Competition Shellholders for more repeatable shoulder bump from one session to the next.
How do I set the shoulder bump with the 338 Lapua Body Die?
You control shoulder setback by adjusting the die's position relative to the shellholder. A good starting method is to size a fired case while measuring with a headspace comparator and work the die down until you get roughly .002 of bump. Taking that measurement off your own fired brass is the most accurate way to dial it in for your rifle.
When should I use a body die instead of just neck sizing?
Body dies shine once your neck-sized brass starts getting hard to chamber after several firings. Running the cases through the body die sets the shoulder back and sizes the body to chamber dimensions so they drop in and extract cleanly again. It's a common fix for stuck or sticky cases without over-working your brass every time you load.




Reviews
There are no reviews yet.