Description
If you reload any of the .338 bottleneck cartridges and you're tired of fighting rough, grabby expander balls on the downstroke, this Redding carbide size button kit is one of the easiest upgrades you can make to a die you already own. The carbide button replaces the standard steel sizing button, and because carbide is so slick, your case necks pass over it with a smoothness you can feel on the press handle. No inside-neck lube, no screeching, no stretched necks from a sticky expander hanging up on the way out.
What the .338 Carbide Sizing Button Actually Does
The button is free-floating on the decapping rod, which lets it self-center inside the case mouth as the neck comes back through it. That little bit of float is what keeps everything concentric and helps your necks come out straight instead of pulled off-axis. Reloaders who switch over tend to notice the expander comes back through the neck so easily they can barely feel it, and your brass stays cleaner since you're not smearing lube inside every case.
Fitting the .338 Carbide Button Kit to Your Dies
This button is sized for .338 caliber (.338 bullet diameter), covering cartridges like the .338 Win Mag, .338 Lapua Magnum, .340 Weatherby, and .338-06. It drops into Redding Full Length, Neck, and Type-S sizing dies, and it's a listed optional upgrade for Redding's conventional .338 die sets. Installation is simple: pull your existing decapping rod, swap the steel button for the carbide one, secure it with the included retainer, and you're sizing.
Redding Quality You Can Count On
Redding has built a reputation on precision reloading tools, and this little kit punches above its size. It's a small investment that pays off every time you size a batch of .338 brass, with less effort at the press and better-centered necks for your loaded rounds.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 49337
- UPC: 611760493379
- Caliber: .338 Caliber (.338 bullet diameter)
- Type: Carbide Size Button Kit
- Button Material: Carbide
- Mounting: Free-floating on decapping rod, self-centering
- Lubrication: No inside-neck lube required
- Die Compatibility: Redding Full Length, Neck, and Type-S sizing dies
- Country of Origin: United States
What’s Included
- Carbide size button
- Retainer
- Spare decapping pin
Frequently Asked Questions
Which dies does the .338 carbide sizing button work with?
It's designed to upgrade Redding Full Length, Neck, and Type-S sizing dies in .338 caliber. It serves as the optional carbide size button for Redding's conventional .338 die sets, including cartridges like the .338 Win Mag and .338 Lapua Magnum. You simply replace the standard steel button on your decapping rod with the carbide one.
Do I still need to lube the inside of the case neck with this carbide button?
No, that's the main draw. The carbide button makes inside-neck sizing smooth enough that no inside-neck lubrication is required. Some reloaders still add a touch of neck lube when they're sizing down a long way, but for everyday work the carbide glides on its own.
Why is the button free-floating instead of fixed?
The carbide button floats on the decapping rod so it can self-center inside the case neck as the case pulls back over it. That keeps the neck concentric and helps your loaded rounds run straighter. It's a small design detail that makes a real difference in consistency.
What comes in the .338 carbide size button kit?
Each kit includes the carbide size button, a retainer, and a spare decapping pin. That's everything you need to make the swap on your existing Redding decapping rod. Nothing else is required to get it installed and running.



Reviews
There are no reviews yet.