L.E. Wilson 33 XC Bushing Neck Sizing Die – Stainless SND-33XC

Description

If you're loading 33 XC for a bolt gun built around accuracy, the L.E. Wilson Stainless Steel Bushing Neck Sizing Die puts neck tension right in your hands. Rather than dragging an expander ball through the case neck, this die sizes the outside of the neck with an interchangeable bushing. That means better concentricity, less brass working, and the kind of repeatable results precision reloaders chase round after round.

This is a hand die, built for use with an arbor press or a soft mallet. It is not made for a conventional 7/8-14 threaded press, so keep that in mind before adding it to your bench. The die sizes the neck to roughly 3/16 inch from the case mouth, leaving a small portion unsized, a setup many long-range reloaders feel gives them a more consistent chamber fit. It comes with a decapping rod so you can knock out the spent primer while you size.

Dialing In Neck Tension on Your 33 XC Brass

The whole point of a bushing die is choice. You measure the outside diameter of a loaded, seated round, then pick a bushing a thousandth or two under that number to set exactly the grip you want on the bullet. The 33 XC die accepts L.E. Wilson bushings, and Redding bushings drop right in as well since they share the universal sizing standard. Bushings are sold separately, which lets you build a small set and tune tension to different loads and brass lots.

Built From Stainless for the Long Haul

L.E. Wilson has been making match-grade reloading tools for a long time, and this die carries that reputation. The stainless construction holds up to years of use and resists the kind of wear that throws off consistency. For the 33 XC crowd running fire-formed brass and chasing tight groups at distance, it's a straightforward, proven way to keep neck tension honest without overworking your cases.