$99.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Talley built its name on scope rings that hold zero through anything, and the 30mm Medium Quick-Detachable set (part 600004) is a perfect example of why hunters keep coming back. These rings use a lever-operated clamp that grabs onto the dovetail of a Talley base, so you can pull your scope off and reattach it later with the confidence it'll return to where you left it. The matte blue steel finish keeps things low-key and glare-free out in the field, and the vertically split design puts both halves of the ring in solid contact with the base for a rock-steady hold.
Everything here is CNC-machined from steel, which is a big part of why Talley rings have such a reputation for tight tolerances. The medium height comes in at .400 inches measured from the top of the base to the bottom of the ring, which clears most standard objective bells on 30mm scopes without sitting your optic up too high. The quick-detach system runs on just one moving part per ring, so there's very little to fuss with and even less to go wrong. Loosen the lever, lift the scope, done.
One thing worth knowing up front: these rings are made to clamp onto Talley bases and are not meant for a Picatinny rail. If you're already running a Talley base setup, or planning to pair these with one, you're good to go. The real draw of a QD system like this is flexibility. You can keep a backup scope pre-sighted and swap it in fast, or pull the optic for rough travel and iron-sight work, then drop it back on and trust your zero. Folks who run these tend to praise the solid construction and how reliably they maintain point of aim across repeated mounts.
Made in the USA on precision machinery in South Carolina, these are the kind of rings you set up once and stop thinking about. For a 30mm scope on a Talley base, the 600004 is a dependable, no-nonsense choice.
No, these rings are designed to clamp onto Talley bases only and are not made for a Picatinny or Weaver rail. You'll need a matching Talley base for your specific rifle to use them. Check that your base is a Talley dovetail setup before ordering.
These are built for riflescopes with a 30mm main tube. If your scope has a 1-inch or 34mm tube, you'll want a different Talley ring in the matching diameter. The medium height here fits most 30mm scopes with standard objective bells.
Yes, return-to-zero repeatability is the whole point of the QD lever system. The levers clamp the rings tightly to the dovetail base, and users consistently report the scope returns to point of aim after being removed and remounted. It's a popular setup for carrying a pre-sighted backup optic or pulling the scope for travel.
The medium height measures .400 inches, taken from the top of the base to the bottom of the ring. That's enough clearance for most standard 30mm scopes while keeping the optic mounted low for a comfortable cheek weld. If you're running a large objective, you may want to step up to high.
| UPC | 876430003054 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 600004 |
| Style | Quick-Release Rings |
You must be logged in to post a review.
Reviews
There are no reviews yet.