$54.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Wheeler Engineering's 1-Piece Bolt Action Scope Mount takes two jobs that usually mean separate parts, the base and the rings, and rolls them into one rigid chunk of aluminum. That matters more than it sounds. A single integral unit removes the extra hardware interface where movement and alignment issues tend to creep in, so your zero stays put when the rifle gets bounced around in the field or soaks up recoil shot after shot. This one is the 30mm, medium-height configuration with a black anodized finish, machined to drop onto Savage 10/110 receivers and compatible Remington Model 700 long and short action rifles.
The built-in 20 MOA of elevation cant is the real draw here for anyone reaching past the usual hunting distances. That angle gives your scope more usable elevation travel before you run out of adjustment, which is exactly what you want when you're dialing for longer shots. If your rifle is set up for 6.5 Creedmoor, 308, or anything you plan to push out to distance, that extra built-in slope lets the turret do its job without topping out.
The body is machined from 6061 aluminum, so it keeps things light without feeling flimsy. Each ring uses a six-screw cap design, and that extra clamping surface spreads the load evenly across your 30mm scope tube for a secure hold. The medium ring height clears mid-size objectives nicely, with folks reporting enough room to seat a 50mm objective scope and still run flip caps. Worth noting on fitment: Savage mounting on this one uses the 6-48 screw pattern suited to pre-2020 receivers, so double-check your action before you order.
A swing-out anti-cant level is integrated right into the mount and can be posted on the front or rear ring. Flip it out, level your reticle to the rifle, and fold it back down when you're done. It's a small touch that pays off at distance, where even a slight cant throws your point of impact off more than most folks expect.
It's machined for the Savage 10/110 and compatible Remington Model 700 long and short action receivers. On the Savage side, the hole pattern uses 6-48 screws suited to pre-2020 actions, so it's worth confirming your receiver's screw spacing before ordering. If your action matches, it drops right on as a direct one-piece mount.
The base is built with 20 MOA of forward slope, which gives your scope more usable elevation travel for longer shots. Instead of running out of adjustment when you dial up, you keep that extra range in reserve. It's the kind of feature that pays off most when you're shooting cartridges like 6.5 Creedmoor or 308 out to distance.
The medium height is a solid middle-ground choice, and users have reported seating scopes with 50mm objectives while still running flip-up lens caps. Clearance always depends on your specific scope's objective bell and overall dimensions. If you're running something larger, the extra-high version of this mount is available for more room.
A one-piece design combines the base and rings into a single rigid unit, which removes an extra interface where misalignment and movement can happen. That gives you a more consistent hold and helps your zero stay put under recoil and rough handling. The six-screw ring caps add even more clamping strength around the scope tube.
| UPC | 661120079231 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 1108727 |
| Model | |
| Shipping Weight | 0.515 |
| Style | Direct Mount |
You must be logged in to post a review.
Reviews
There are no reviews yet.