Description
Small parts wear out, and on a .308 AR platform those little pieces can be a headache to track down one at a time. The CMMG 308AR Mk3 Bolt Rehab Kit solves that by putting every commonly replaced bolt component in one package, so you can refresh a tired bolt or fix a malfunction without hunting down individual parts. It fits CMMG Mk3 and LR308 bolts, along with DPMS pattern .308 bolts, which covers a big chunk of the AR-10 style rifles out there.
What Comes in the Mk3 Bolt Rehab Kit
The kit is loaded with the parts that see the most stress during cycling: a firing pin and firing pin retaining pin, extractor with inner and outer springs, extractor pin, a helical gas ring, ejector, ejector spring, ejector roll pin, and the cam pin. Those are exactly the components that tend to go first from heat, friction, and thousands of rounds of hard use, so having fresh ones on hand means less downtime.
Why 308 AR Owners Keep This Kit Around
Parts for the larger-frame .308 platform aren't as easy to find as standard AR-15 bits, and buying them piecemeal gets old fast. A lot of folks grab this kit as a backup and toss it in the range bag or store it with their gear so a broken extractor or worn gas ring doesn't end a shooting session. The old saying goes two is one and one is none, and a spare rehab kit is cheap insurance against a bolt going down at the worst possible time.
Getting the Mk3 Rehab Kit Installed
Swapping these parts is straightforward if you're comfortable working on an AR bolt. A punch set, a small pick, and a bit of patience with the extractor and ejector springs will get you through most of it. If you've built or maintained an AR before, none of this will feel foreign, and even first-timers can handle it with a good bench and a little guidance.
Key Specifications
- Manufacturer: CMMG
- Manufacturer Part Number: 38AFF95
- UPC: 815835016559
- Platform: 308 AR / LR308 / Mk3
- Compatibility: Fits CMMG and DPMS pattern .308 bolts
- Product Type: Bolt repair / rebuild parts kit
- Caliber Application: .308 Win / 7.62 NATO platform
- Finish: Black
What’s Included
- Mk3 firing pin
- Mk3 firing pin retaining pin
- Mk3 extractor
- Mk3 extractor spring, inner and outer
- Mk3 extractor pin
- Mk3 helical gas ring
- Mk3 ejector
- Mk3 ejector spring
- Mk3 ejector roll pin
- Mk3 cam pin
Frequently Asked Questions
What bolts does the 308AR Mk3 Bolt Rehab Kit fit?
It's designed for CMMG Mk3 and LR308 bolts, and it also fits DPMS pattern .308 bolts. That covers a wide range of AR-10 style rifles built on the common .308 platform. If you're running a large-frame .308 AR, there's a good chance these parts will drop right in.
Do I need special tools to install the parts in this rehab kit?
A basic AR armorer setup will get the job done. You'll want a punch set, a small pick for the extractor spring and O-ring, and something to safely capture the ejector spring under tension. Anyone comfortable disassembling an AR bolt can handle the swap on a bench.
Is this a replacement bolt or just the internal parts?
This is a parts-only kit, not a complete bolt. It includes the small wear items like the firing pin, extractor, ejector, springs, pins, and gas ring that typically fail first. You'll reuse your existing bolt body and simply refresh the internals.
Should I buy the Mk3 rehab kit even if my bolt is running fine?
A lot of owners keep one on hand as a backup. Parts for .308 AR rifles aren't always easy to source in a pinch, so having a rehab kit stored with your gear means a broken extractor or worn gas ring won't cut your range day short. Think of it as cheap insurance for your setup.




Reviews
There are no reviews yet.