Description
Forster's Bench Rest Seater Die has been the benchmark for straight-line bullet seating since they invented the concept, and the .308 Winchester version is one of the most popular dies they make. Instead of just holding the bullet and case neck like a standard seater, a sliding chamber slides down over the whole cartridge and supports the full outside diameter of the sized case while the bullet is pressed in. Everything stays lined up on the same axis, which is where that reputation for low runout and repeatable concentricity comes from.
What Makes the 308 Bench Rest Seater Die Different
The heart of this die is the caliber-specific sliding chamber with a concentric bullet channel cut just a hair larger than bullet diameter. That snug fit guides the bullet in dead straight. The seating stem is hand polished and shaped to contact the bullet on the ogive rather than the tip, so it plays nicely with everything from standard hunting bullets to long, pointy match projectiles like ELD and TMK designs. Reloaders who have fought with malformed bullet tips from other brands tend to notice the difference right away.
Build Quality and Setup on the 308 Seater Die
This is a non-crimping seater, so it is built for accuracy rather than roll or taper crimping. It comes with Forster's Cross Bolt Die Lock Ring, which clamps around the die body instead of digging a set screw straight into the threads, giving you a cleaner lock and no thread damage. The die uses standard 7/8-14 threads, so it drops into most common presses. Running it in a Forster Co-Ax press means you skip the shellholder entirely; in any other press, just grab the shellholder your press maker recommends.
Who Reaches for a Bench Rest Seater Die
If you shoot .308 for precision rifle, F-Class, high power, or you just want your hunting loads as tight as possible, this is the seater that quietly earns its keep on the bench. It is the kind of tool you buy once and keep using for years.
Key Specifications
- Manufacturer: Forster Products
- Caliber: 308 Winchester / 308 National Match
- Die Type: Bench Rest Seater Die (non-crimping)
- Seating Style: Straight-line / co-axial with sliding chamber
- Seating Stem: Hand-polished, seats on bullet ogive
- Lock Ring: Forster Cross Bolt Die Lock Ring
- Thread: 7/8-14
- Press Compatibility: Fits most standard reloading presses
- Country of Origin: United States
- Manufacturer Part Number: 006251
- UPC: 757253001406
What’s Included
- One Forster Bench Rest Seater Die
- One polished seating stem
- Cross Bolt Die Lock Ring
- Instructions
- Die box
Frequently Asked Questions
Does the 308 Bench Rest Seater Die crimp the bullet?
No, this is a non-crimping style seater built purely for accurate, straight-line bullet seating. If you need a crimp for your loads, you would add a separate roll or taper crimp die. Leaving crimping out is part of what keeps runout low and concentricity high.
Will this Forster seater die fit my press?
It uses standard 7/8-14 threads, so it works with most common single-stage and turret presses. If you run a Forster Co-Ax press you will not need a shellholder at all. In any other press, just use the shellholder recommended by that press manufacturer.
Does the die work with long, high-BC match bullets?
Yes. The hand-polished seating stem is designed with clearance to contact the bullet on the ogive rather than the tip, which keeps sensitive match and VLD-style projectiles from being deformed. Many reloaders switch to it specifically because other seaters were marring their bullet tips.
What makes the Bench Rest Seater Die more accurate than a standard seater?
A sliding chamber drops down over the entire cartridge and supports the full outside diameter of the sized case before the bullet is seated. Most other seaters only support the case neck or rim. Holding the case, bullet, and stem in alignment the whole way through is what produces consistently concentric ammo.




Reviews
There are no reviews yet.