$999.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're chasing a lighter, better-shooting AR-10 in .308 Winchester, this is the barrel that gets you there. Proof Research builds the PR10 around a full-profile, match-grade 416R stainless steel blank, then turns it down to a slim contour and wraps it in high-strength, aerospace-grade carbon fiber set in a proprietary resin. The end result weighs up to 64 percent less than a comparable all-steel barrel while staying every bit as accurate. The rifling is single-point cut and hand lapped, which is the kind of process you usually only see on premium precision bolt guns.
The carbon wrap isn't just there to shave ounces. It actively pulls heat away from the steel liner along the length of the barrel, so the tube cools faster between strings and holds its point of impact during longer sessions. That same construction is tough as nails too, shrugging off the dings, scratches, and weather that come with hard field use.
What really sets Proof's AR barrels apart is the Caliber Matched Gas System (CAMGAS). Instead of using a generic port location, Proof moves the gas port to keep system pressure in line with what the AR-10 platform was originally engineered around. In practice that means a softer recoil impulse, less fouling dumped back into the receiver, more reliable extraction, and easier life on your brass. It ships with the correct intermediate-length gas tube, so you've got what you need to time the build right.
Specs you'll want for your parts list: 16" length, 1:10 twist, intermediate gas system, .750 gas journal, and a 5/8×24 threaded muzzle ready for your brake or suppressor. The 1:10 twist does a great job stabilizing the heavier 168 to 175 grain match loads most .308 shooters lean on.
This one's built for the shooter putting together a lightweight precision or hunting AR-10 who doesn't want to compromise on barrel quality. Folks running these consistently report half-MOA groups with the right ammo, plus a noticeable bump in handling once the front-end weight drops off. If you want one barrel that does it all, this is hard to beat.
It's built for AR-10 / .308 pattern rifles and uses Proof's deep feed barrel extension, which makes it compatible with both DPMS and Armalite style lower receivers. As with any AR-10 build, double-check your handguard's inner diameter for clearance over the carbon fiber, and confirm your bolt is a proper .308 bolt. Beyond that, it drops into a standard large-frame upper.
Yes. Every Proof CAMGAS barrel ships with the correct custom-length gas tube, in this case an intermediate-length tube to match the barrel. You'll still need to supply your own gas block, barrel nut, handguard, and muzzle device to finish the build.
Proof's carbon fiber barrels run up to 64 percent lighter than a steel barrel of similar contour. On a 16" .308 that adds up to a real difference in how the rifle balances and carries, which is a big deal for hunting and long days on your feet. You lose the front-end weight without losing the rigidity that keeps you accurate.
It's a 1:10 twist, which is the sweet spot for stabilizing the common 168 to 175 grain .308 match bullets most precision shooters run. It'll also handle lighter and heavier loads fine, but the heavier match offerings are where this twist really shines. Shooters routinely report sub-MOA and even half-MOA groups once they find the load their barrel prefers.
The carbon wrap is applied in a helical pattern that pulls heat away from the steel liner along the length of the barrel rather than trapping it. That means the barrel cools faster between strings and holds its point of impact better during extended firing. Combined with the single-point cut, hand-lapped bore, it's why these barrels stay consistent when a thin steel profile would start to wander.
| UPC | 843068101261 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 101261 |
| Length | 16'' |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.