0
0

JP Enterprises 308 AR Alternate 3 Spring Pack for JPSCS-10

UPC: 812872020860

$26.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The JP Silent Captured Spring is one of the smoothest recoil setups you can run in a large-frame AR, but every rifle is a little different. Gas block choices, bolt carrier mass, and barrel length all change how a gun wants to cycle. This alternate spring pack for the JPSCS-10 gives you three swappable spring weights so you can fine-tune that stock recoil system to your specific .308 build instead of settling for close enough.

Why the JPSCS-10 Spring Pack Matters

The spring that ships in your Silent Captured Spring is chosen to cover the widest range of configurations, and it does that well. But swapping in a slightly different rate through a quick disassembly can get you noticeably better performance, which really shows on rifles running a fixed gas block with no way to throttle the system down. A heavier spring is the move if you feel the buffer head bottoming out under fire. Go lighter if the bolt won't reliably lock back on an empty mag even when the gun is fully gassed.

Tuning a Large-Frame .308 AR the Easy Way

Big-frame guns behave differently than an AR-15, and matching spring rate to your setup can give you a faster, lighter impulse that feels a lot closer to a 5.56 carbine. Rifles running a standard bolt carrier without a JP adjustable gas system usually want a heavier spring to overcome the extra mass and friction, while low-friction actions like the Armalite pattern can often run a lighter rate. Because platforms vary so much, this kit is built to get just about any JPSCS-equipped .308 cycling right.

What Comes in the Pack

The three springs run from lightest to heaviest and are color-coded on the ends so you always know which one you're grabbing. JP also tosses in a spare guide rod retainer screw in case you strip the threads during a swap, which is a nice touch for anyone who plans to experiment. Made in the USA by JP Enterprises.

Key Specifications

  • Manufacturer: JP Enterprises
  • Manufacturer Part Number: JPSCS-PACK10
  • UPC: 812872020860
  • Fits: JP Silent Captured Spring JPSCS-10 / JPSCS2-10
  • Platform: .308 AR / AR-10 / LR-308 large frame
  • Springs Included: 3 (JPSCS-SPRING10-100, -105, -110)
  • Color Coding: 100: red / 105: blue and red / 110: yellow and red
  • Guide Rod Screw: 10-32, takes a 1/8 hex key
  • Origin: Made in USA

What’s Included

  • Spring JPSCS-SPRING10-100 (lightest, red end)
  • Spring JPSCS-SPRING10-105 (blue and red ends)
  • Spring JPSCS-SPRING10-110 (heaviest, yellow and red ends)
  • One spare guide rod retainer screw

Frequently Asked Questions

Will this spring pack work with any JP Silent Captured Spring?

This pack is made for the large-frame JPSCS-10 and JPSCS2-10 units used on .308 AR, AR-10, and LR-308 rifles. It won't fit the AR-15 sized JPSCS-15 system, which uses its own separate spring pack. Make sure your SCS is the 10 series before ordering.

How do I know which spring weight to run in my JPSCS-10?

If you feel the buffer head fully compress and bottom out while shooting, step up to a heavier spring. If the bolt won't lock back on the last round even when the rifle is fully gassed, go lighter. Rifles without an adjustable gas block usually benefit most from being able to swap rates like this.

Are the springs marked so I can tell them apart?

Yes. The ends are color-coded so you can identify each weight at a glance. The lightest is marked red, the middle spring has blue and red ends, and the heaviest carries yellow and red ends.

Is swapping the spring in the JPSCS-10 hard to do?

Not at all. The Silent Captured Spring is designed to come apart and reassemble quickly with basic tools, using a 10-32 guide rod screw that takes a 1/8 hex key. JP includes a spare retainer screw in case the threads strip during a swap, so you have a backup while you experiment with rates.

Additional information

UPC

812872020860

Manufacturer

Manufacturer Part Number

JPSCS-PACK10

Reviews

There are no reviews yet.

Be the first to review “JP Enterprises 308 AR Alternate 3 Spring Pack for JPSCS-10”