0
0

Forster 300 WSM Ultra Micrometer Seater Die (U00101)

UPC: 757253100055

$118.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 300 Winchester Short Magnum and you care about seating depth consistency, the Forster Ultra Micrometer Seater Die is the kind of tool that quietly makes your groups shrink. It builds on Forster's proven Bench Rest seater design and adds a micrometer top that lets you set cartridge overall length with real repeatability. The sliding die chamber surrounds the case and bullet for their full length and keeps everything on a common axis while the bullet is press-fit seated, which is exactly what you want for straight, concentric ammo. This is a non-crimping seater, so it focuses on alignment rather than squeezing the case mouth.

Where the Forster Ultra Micrometer Earns Its Keep

The micrometer is the headline feature, and it works the way you'd hope. You seat a bullet close, measure it, then dial the stem up or down to land on your exact number. Gradations are marked in .001 inch increments with bright white markings that are easy to read under bench lighting, and the mechanism adjusts in either direction down to .0005 inch. Once you record a setting, coming back to it later or switching between bullet profiles is quick, which takes a lot of the trial and error out of chasing the lands.

Fitting the 300 WSM Seater Die to Your Press

This die wears Forster's cross bolt locking ring, which clamps the split ring instead of driving a set screw into the die threads. It drops right into a Forster Co-Ax and threads into standard 7/8-14 presses just the same. Reloaders who run these consistently point to low runout and excellent concentricity, thanks in large part to that case-holding sleeve that keeps the round aligned from start to finish.

For a cartridge like the 300 WSM that often gets built for long range work, the payoff is loaded rounds that are square to the bore and repeatable from one session to the next. Pair it with a quality sizing die and good brass prep, and this seater becomes the finishing touch that puts your bullets exactly where you set them.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00101
  • UPC: 757253100055
  • Cartridge: .300 Winchester Short Magnum (WSM)
  • Die Style: Bullet Seating Die (Ultra Micrometer)
  • Die Series: Bench Rest
  • Seating Type: Non-crimping, press-fit
  • Micrometer Adjustment: Either direction to 0.0005 inch
  • Gradations: Marked in 0.001 inch increments
  • Locking Ring: Forster Cross Bolt
  • Thread: 7/8-14 standard press compatible
  • Item Length: 6.25 inches
  • Item Weight: 1.28 lbs

What’s Included

  • Forster Ultra Micrometer Seater Die (.300 WSM)
  • Cross bolt locking ring

Frequently Asked Questions

Does the 300 WSM Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It holds the bullet and case in alignment and press-fits the bullet to your set depth without working the case mouth. If you need a crimp, you would handle that with a separate crimp die.

Will this Forster seater die fit a standard reloading press?

Yes. It uses standard 7/8-14 threads, so it fits common single-stage presses, and it also drops right into a Forster Co-Ax. Keep in mind the round cross bolt locking ring is designed to shine on the Co-Ax, where dies snap in and out without threading.

How precise is the micrometer adjustment?

The micrometer is marked in .001 inch gradations and adjusts in either direction down to .0005 inch. Once you record a setting you can return to it later, which makes switching between bullets or re-establishing a load quick and repeatable.

Does this die help with concentricity and runout?

It does. The sliding die chamber surrounds the case and bullet for their full length and keeps everything on a common axis during seating, which is why handloaders consistently report low runout and straight, concentric rounds. For best results, pair it with good brass prep and a quality sizing die, since the sizing step does a lot of the work in keeping cases straight.

Additional information

UPC

757253100055

Manufacturer

Manufacturer Part Number

U00101

Reviews

There are no reviews yet.

Be the first to review “Forster 300 WSM Ultra Micrometer Seater Die (U00101)”