Description
If you're loading 300 WSM and want your reworked brass to drop back into the chamber clean every time, this Forster full length sizing die is the kind of tool that earns its spot on the bench. It sizes the case neck, shoulder, and body in one pass, bumps the shoulder back to set your headspace, deprimes the old primer, and expands the neck on the way out. The result is brass sized down just enough to chamber smoothly in a SAAMI minimum chamber with minimal play, which is exactly what you want when you're chasing consistency.
What Sets the Forster 300 WSM Full Length Die Apart
Forster builds these with one-piece reamers for the kind of concentricity that shows up on your target. The standout feature is the elevated E-Z Out floating expander ball. Instead of expanding the neck after the case has dropped out of the die, the ball sits up high so the neck gets expanded while most of the case is still captured inside the sizing area. That keeps the neck lined up with the center axis of the case, which means straighter necks, less runout, and bullets that engage the rifling square. There's also a precisely positioned vent hole in the die body that lets trapped air and excess lube escape so you don't end up with pressure dents on your cases.
Getting the Most Out of Your 300 WSM Sizing Die
The decapping assembly is adjustable with knurled knobs for easy setup, and the decapping pin is hardened to stand up to repeated use. The expander ball runs about 0.001 inch under bullet diameter, so with a touch of brass springback you land right around 0.002 inch of bullet grip. Lubricate the neck, shoulder, and body lightly with a quality high pressure lube before each stroke and you'll keep things running smooth. The included die body ring is cut to work beautifully in a Forster Co-Ax press, but it threads right into any standard 7/8-14 press too.
Benchrest Reputation at the Reloading Bench
Forster has a long track record with precision reloaders, and these full length dies are a big reason why. Plenty of folks start their Forster collection with a full length sizer because it covers the most ground. Made in the USA and built to tight tolerances, this one's a solid pick whether you're working up a hunting load or ringing steel way out there.
Key Specifications
- Manufacturer: Forster Products
- Caliber: 300 Winchester Short Magnum (300 WSM)
- Die Type: Full Length Sizing Die
- Manufacturer Part Number: 005571
- UPC: 757253100031
- Thread: 7/8-14 (standard press threading)
- Expander Ball System: Elevated E-Z Out Floating Expander Ball
- Expander Ball Diameter: Approximately 0.001 inch under bullet diameter
- Machining: One-piece reamers for high concentricity
- Decapping Pin: Hardened, replaceable
- Press Compatibility: Forster Co-Ax and standard 7/8-14 threaded presses
- Country of Origin: Made in the U.S.A.
What’s Included
- One Forster Full Length Sizing Die
- One decapping assembly with decapping pin and floating expander ball
- Forster die body ring (works with Co-Ax and 7/8-14 threaded presses)
- Complete instructions
- One die box
Frequently Asked Questions
What does the Forster 300 WSM full length sizing die do?
This die sizes the case neck, shoulder, and body in a single stroke while it bumps the shoulder back to set headspace, removes the spent primer, and expands the neck as the case comes out. That brings your fired 300 WSM brass back down to spec so it chambers cleanly in a SAAMI minimum chamber. It's the die most reloaders reach for first because it handles the most work.
Does this die come with a shellholder?
No, a shellholder is sold separately and is not included. You'll need the correct shellholder for 300 WSM if you're running a standard threaded single stage press. If you're using a Forster Co-Ax press, you won't need a shellholder at all since the Co-Ax uses sliding jaws.
Will the Forster 300 WSM sizing die fit my press?
Yes, it uses standard 7/8-14 threading so it drops into just about any common reloading press. The included die body ring is also designed to work great in a Forster Co-Ax press. Either way you're covered.
What makes the E-Z Out expander ball different?
The expander ball sits elevated inside the die, so the neck gets expanded while the body of the case is still held in the sizing section. That keeps the neck concentric with the case axis for straighter necks and less runout. It's a big part of why Forster dies have the reputation they do with precision loaders.




Reviews
There are no reviews yet.