Description
The Redding Type S-Match Bushing Full Length Die Set is built for the handloader who chases single-digit ES numbers and tight groups out of a 300 Winchester Magnum. This two-die set pairs a Type S bushing full-length sizing die with Redding's Competition Seating Die, giving you control over neck tension and seating depth that standard dies just can't match. It's the kind of setup that makes sense once you've started weighing charges and sorting brass and want your dies to keep up.
What the Type S Bushing Full Length Sizer Brings to the Bench
The sizing die uses interchangeable bushings available in .001-inch increments, so you set your own neck tension instead of living with whatever a fixed die hands you. The bushing self-centers on the case neck, which helps with concentricity, and the adjustable decapping rod lets you size only part of the neck length if that's how you like to run your brass. Pull the bushing and internal parts out entirely and the same die doubles as a body die, which is a handy trick for bumping shoulders on fired cases. Note that bushings and a shellholder are sold separately, so pick up the right bushing for your chamber and a #6 shellholder before your first session.
Why the Competition Seating Die Earns Its Keep
Redding's Competition Seating Die is widely regarded as one of the best straight-line seaters made. A spring-loaded sliding sleeve captures and aligns the case before the bullet ever starts into the neck, and the micrometer head is calibrated in .001-inch increments so you can dial seating depth precisely and return to a recorded setting during load development. The seating stem is ground to match bullet diameter and essentially floats on a column of air inside the sleeve. One thing worth knowing: the Competition Seating Die isn't meant for heavily compressed loads.
Match-Grade 300 Win Mag Handloading
For long-range target work or building premium hunting ammo for a magnum, this set is a serious step up. Everything is machined from case-hardened steel and ships in a hard plastic storage box that keeps your dies protected on the shelf.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36153
- UPC: 611760361531
- Cartridge: .300 Winchester Magnum
- Die Set Type: Type S-Match Bushing Full Length (2-Die Set)
- Bullet Diameter: 0.308 in
- Material: Case-Hardened Steel
- Bushing Adjustment: Interchangeable, .001-inch increments (sold separately)
- Seating Die: Competition Seating Die with .001-inch micrometer head
- Shellholder: #6 (sold separately)
- Thread: 7/8-14
- Country of Manufacture: United States
What’s Included
- Type S Bushing Full Length Sizing Die (with decapping rod, standard sizing button, and decapping pin retainer)
- Competition Bullet Seating Die (with sliding sleeve and micrometer adjusting head)
- Hard plastic storage die box
- Instructions
Frequently Asked Questions
Does the 300 Win Mag Type S-Match die set come with bushings?
No, Redding ships this set without bushings so you can choose the exact neck tension you want. Bushings are available separately in .001-inch increments. Measure a loaded round's neck diameter and subtract a couple thousandths to pick your starting bushing.
Do I need a shellholder with this Redding die set?
Yes, the shellholder is sold separately. For the 300 Winchester Magnum you'll want a #6 shellholder. It's a cheap add-on, so grab one with your dies so you're ready to load.
Can the Type S bushing sizing die be used as a body die?
It can. By removing the bushing and all the internal parts, the full-length sizing die works as a body die for bumping the shoulder back on fired brass. The adjustable decapping rod also lets you size only part of the neck length when you want.
Is the Competition Seating Die okay for compressed loads?
Redding notes that the Competition Seating Die is not intended for heavily compressed loads. If you're running max charges of slow powder that compress significantly, a standard seating die is the better choice. For typical match and hunting loads, the Competition Seating Die gives excellent seating-depth control and bullet alignment.




Reviews
There are no reviews yet.