Description
If straight bullets and tight concentricity matter to you, the Forster Bench Rest Seater Die for 300 Winchester Magnum belongs on your bench. This is the single seater die (MPN 006221), built around the sliding chamber design that put Forster on the map with handloaders chasing accuracy. Instead of only guiding the bullet and case neck, the chamber captures the full outside diameter of the sized case, lining up the case, bullet, and seating stem before the bullet ever starts into the neck. The result is ammo that comes out noticeably straighter than what a standard seater will give you.
What Makes the 300 Win Mag Bench Rest Seater Different
The heart of this die is a caliber-specific sliding sleeve, machined with a one-piece reamer for a close fit to your brass. That tight chamber is the same concept Forster patented decades ago, and it's still the hallmark of their seater line. A concentric bullet channel sits just slightly larger than bullet diameter, so the bullet slides in dead straight rather than getting pushed in at an angle.
Dialing In Your Seating Depth
The seating stem is hand polished and rides on a knurled micrometer-free adjustment that's easy to tweak at the bench. Forster has kept refining their stems over the years to play nicely with modern projectiles, including ballistic tips and VLD-style match bullets, so whether you're loading hunting rounds or long-range match fodder for your 300 Win Mag, the stem fits the ogive the way it should.
Good to Know Before You Order
This is a non-crimping seater, which is exactly what you want for precision loading. If you need a crimp, you'd add a separate roll or taper crimp die. It fits standard reloading presses, and if you run it in a Forster Co-Ax press you won't even need a shellholder. Made in the U.S.A. and built to earn a long life on your press.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 006221
- UPC: 757253001383
- Cartridge: 300 Winchester Magnum
- Die Type: Bench Rest Seater (Bullet Seating) Die
- Number of Dies: 1
- Crimp: Non-crimping
- Seating Stem: Hand-polished, adjustable
- Chamber: Caliber-specific sliding chamber, one-piece reamer
- Press Compatibility: Fits most standard reloading presses
- Configuration: Rifle
- Country of Origin: Made in U.S.A.
What’s Included
- One Forster Bench Rest Seater Die (300 Winchester Magnum)
- One polished seating stem
- Die body split lock ring
- Instructions
- Die box
Frequently Asked Questions
Does the Forster Bench Rest Seater Die crimp the bullet?
No, this is a non-crimping seater die, which is what you want for precision loading and consistent neck tension. If your load calls for a crimp, you would add a separate roll or taper crimp die to your process. The non-crimp design is a big part of why these dies produce such straight, consistent rounds.
Do I need a shellholder to use this die?
It depends on your press. If you run the die in a Forster Co-Ax press, no shellholder is needed. In any other standard press, you'll use the manufacturer-recommended shellholder for 300 Winchester Magnum.
Is this a full die set or just the seater die?
This listing is the single Bench Rest Seater Die for 300 Win Mag (MPN 006221), not the two-die set. You'd pair it with a sizing die to complete your reloading setup. If you want both in one package, Forster also offers a Bench Rest two-die set that includes a full-length sizer.
Will this seater die work with VLD and ballistic tip bullets?
Yes. Forster has refined the seating stem over the years to fit modern projectiles, including ballistic tips and very low drag (VLD) match bullets. The hand-polished stem contacts the bullet correctly so seating depth stays consistent across your loads.




Reviews
There are no reviews yet.