0
0

Redding 300 Weatherby Magnum Competition Bushing Neck Die Set

UPC: 611760582523

$332.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Redding's top-tier setup for the 300 Weatherby Magnum reloader who wants to wring every bit of accuracy out of their brass. The set is built around neck sizing, where you only work the case neck and leave the fired body alone for a tighter fit to your chamber. It's the kind of tooling benchrest and long-range folks reach for when they've already done the prep work on their cases and want dies that won't undo it.

What Comes in the 300 Weatherby Magnum Competition Bushing Neck Set

You get three dies: the Competition Bushing Neck Sizing Die, a Body Die, and the Competition Seating Die. The bushing neck die uses interchangeable sizing bushings in .001-inch increments, so you dial in exactly how much neck tension you want. A micrometer lets you adjust how far down the neck gets sized and return to a favorite setting later. The body die is there for when cases start to chamber a little stiff after repeated firings. It full-length resizes the body and bumps the shoulder back without touching the neck.

How the 300 Weatherby Bushing Neck Dies Keep Runout Low

Both the neck sizer and the seater use a precision-ground sliding sleeve that captures and aligns the case before any work happens. On the seating side, the bullet guide and seating stem fit is tight enough that the stem essentially floats into place, which keeps bullet runout to a minimum. The seater's micrometer head is calibrated in .001-inch steps with a zero-set feature, so you can lock in a load and come right back to it.

A couple of real-world notes worth knowing. This set does not include a size button, since it's aimed at handloaders running neck-turned or thickness-sorted brass. Neck bushings and the shellholder are sold separately, so pick up the right bushing for your brass before your first session. Carbide size button kits and VLD seating stems are available if you want to tailor the setup further down the road.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58252
  • UPC: 611760582523
  • Cartridge: 300 Weatherby Magnum
  • Die Set Type: Competition Bushing Neck (3-Die Set)
  • Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Micrometer Adjustment: Yes, on neck sizing and seating dies, .001" increments
  • Bushing System: Interchangeable bushings in .001" increments
  • Size Button: Not included (designed for neck-turned or sorted brass)
  • Bushings: Sold separately
  • Shellholder: Sold separately
  • Material: Hardened steel
  • Country of Origin: USA

What’s Included

  • One Competition Bushing Neck Sizing Die with micrometer adjustment
  • One Body Die
  • One Competition Seating Die with micrometer head and precision-ground seating stem
  • Die box
  • Instructions

Frequently Asked Questions

Does the 300 Weatherby Magnum Competition Bushing Neck Die Set come with bushings?

No, the neck sizing bushings are sold separately. This lets you choose the exact bushing diameter for your brass and the neck tension you're after. Measure a loaded round's neck diameter and subtract a thousandth or two to pick a starting bushing.

Why doesn't this set include a size button?

This set is built for handloaders who neck-turn or sort their brass for uniform thickness, so a size button isn't needed and could work the neck more than you want. The bushing alone controls neck sizing from the outside. If you do want inside sizing, carbide size button kits are available separately.

What is the body die for in this set?

The body die full-length resizes the case body and bumps the shoulder back without touching the neck. You'll reach for it when cases start chambering stiff after several firings of neck-only sizing. It keeps your brass chambering smoothly while the bushing die handles the neck.

Do I need a separate shellholder for the 300 Weatherby Magnum dies?

Yes, the shellholder is sold separately. The 300 Weatherby Magnum uses a belted magnum case, so make sure you grab the shellholder that matches that head size. Any standard belted magnum shellholder from the common chart will work.

Additional information

UPC

611760582523

Manufacturer

Manufacturer Part Number

58252

Reviews

There are no reviews yet.

Be the first to review “Redding 300 Weatherby Magnum Competition Bushing Neck Die Set”