0
0

L.E. Wilson 300 Remington SAUM Case Gage | CG-RSAUM Headspace Tool

UPC: 857949005593

$38.72

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you reload for the 300 Remington SAUM, this L.E. Wilson Case Gage is one of those tools that earns its spot in the kit fast. It's a one-piece, non-adjustable gage machined to SAAMI minimum chamber dimensions for the cartridge, giving you a quick and repeatable way to read both headspace and overall case length on your brass. Drop a case in, grab a caliper or depth micrometer, and you've got the numbers you need to set up your full-length sizing die the right way.

What the 300 RSAUM Case Gage Tells You

The whole point of the Wilson gage is to keep you from over-sizing. A common slip when reloading is pushing the shoulder back too far, which works the brass harder than it needs to and shortens case life. By comparing a fired case to a resized one in the gage, you can see exactly how much shoulder setback you're getting and tune your die accordingly. The gage also flags when a case has grown past max length and needs a trim, so you're not guessing.

Why Reloaders Reach for the Wilson Case Gage

L.E. Wilson has been a family-run shop since 1927, and they were the first to bring the case gage to market back in 1935 after a customer came to them with a case separation problem. That history shows up in the quality. This gage is precision machined, marked for the 300 Remington SAUM, and made in the USA. It won't measure body diameters, and it's meant to be used with fired cases to give you a baseline for full-length sizing and trimming.

This is the kind of simple, no-batteries tool that quietly makes your handloads more consistent. Whether you're loading for a hunting rifle or chasing tight groups at the range, knowing your headspace and case length takes a lot of the uncertainty out of the process.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: CG-RSAUM
  • UPC: 857949005593
  • Cartridge: 300 Remington SAUM
  • Style: Regular, one-piece non-adjustable
  • Measures: Min/max headspace and min/max case length
  • Use With: Fired cases
  • Country of Origin: Made in USA

What’s Included

  • L.E. Wilson 300 Remington SAUM Case Gage
  • Instructions

Frequently Asked Questions

How does the 300 Remington SAUM Case Gage measure headspace?

You drop a fired case into the gage and take a reading with a caliper or depth micrometer at the head of the case. Depending on whether the case sits high or low relative to the gage's milled surfaces, you can tell how your headspace compares to SAAMI minimum. Comparing a fired case to a sized case shows you exactly how much shoulder setback your die is producing.

Is this the adjustable gage for belted magnums?

No, this is the regular one-piece, non-adjustable style made specifically for the rimless 300 Remington SAUM cartridge. The adjustable version is a separate tool meant for belted magnum cases. This gage is the right fit for RSAUM brass.

Does the Wilson Case Gage check case length too?

Yes. Along with headspace, the gage reads minimum and maximum overall case length so you know when your brass has grown past spec and needs trimming. The milled surfaces give you a quick visual and measured reference for both checks.

Does this gage measure case body diameter?

It does not. The Wilson Case Gage is built to read headspace and case length only, not body diameters. It's intended for use with fired cases to give you a baseline for full-length sizing and trimming.

Additional information

UPC

857949005593

Manufacturer

Manufacturer Part Number

CG-RSAUM

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson 300 Remington SAUM Case Gage | CG-RSAUM Headspace Tool”