0
0

Redding Type S-Match Bushing Full Die Set 300 Remington SAUM

UPC: 611760362750

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing tight groups with your 300 Remington Short Action Ultra Magnum, this Redding Type S-Match Bushing Full Die Set is the kind of tooling that gets you there. It pairs a Type S Bushing Full Length Sizing Die with a Competition Seating Die, two pieces that have earned a strong reputation among precision handloaders who want repeatable results they can measure. Everything is machined in the U.S.A. to the kind of tolerances that make the difference on paper.

What the Type S Bushing Full Length Sizer Brings

The sizing die is where this set really shines. Instead of a fixed neck diameter, it uses interchangeable bushings available in .001 inch increments, so you set your own neck tension based on your brass and your load. The bushing self-centers on the case neck, which helps keep everything concentric, and the adjustable decapping rod lets you control how much of the neck length actually gets sized. You can go with the included sizing button for a traditional approach, or swap in the decapping pin retainer and skip the button entirely if you turn or sort your necks.

Dialing In With the Competition Seating Die

The seating die is a straight-line design with a sliding sleeve that captures and aligns the cartridge before the bullet ever feels pressure. That sleeve is what produces the smooth stroke and the consistent runout numbers these dies are known for. The micrometer head is calibrated in .001 inch clicks, so finding and returning to your seating depth is quick and repeatable, which matters when you're load testing or tuning for a specific bullet.

A Note on Bushings and Setup

Keep in mind the bushings and shellholder are sold separately, which is standard for this family of dies. That's actually part of the appeal, since it lets you tailor the setup to your exact brass and neck tension preference. Grab a couple of bushings around your fired case neck measurement and you'll be ready to load some seriously accurate 300 SAUM ammo.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36275
  • UPC: 611760362750
  • Cartridge: 300 Remington Short Action Ultra Magnum (SAUM)
  • Die Set Type: Type S-Match Bushing Full Die Set
  • Number of Dies: 2
  • Sizing Die: Type S Bushing Full Length Sizing Die
  • Seating Die: Competition Seating Die with micrometer
  • Neck Sizing: Interchangeable bushings in .001 inch increments
  • Micrometer Adjustment: Calibrated in .001 inch increments
  • Thread Size: 7/8-14
  • Country of Origin: Made in U.S.A.
  • Bushings: Sold separately
  • Shellholder: Sold separately

What’s Included

  • One Redding Type S Bushing Full Length Sizing Die
  • Decapping rod with standard sizing button
  • Decapping pin retainer (to use in place of the button)
  • One Redding Competition Bullet Seating Die with sliding sleeve and micrometer head
  • Die box
  • Complete instructions

Frequently Asked Questions

Do I need to buy bushings separately for this 300 Rem SAUM die set?

Yes, the bushings are sold separately, which is standard for Redding's Type S line. This lets you pick the exact neck tension you want for your brass. Measure the neck diameter of a loaded round and order a bushing a thousandth or two under that to get started.

Does the Redding Type S-Match set include a shellholder?

No, the shellholder is not included and needs to be purchased separately. The 300 Remington SAUM uses the same magnum-size case head as several other cartridges, so you may already have the correct shellholder on hand. Check Redding's shellholder chart to match the right number.

What's the difference between this bushing die and a standard full length sizer?

A standard full length die has a fixed neck diameter, while this Type S bushing sizer lets you swap interchangeable bushings to control neck tension exactly. The bushing also self-centers on the neck to improve concentricity. For precision handloaders working up accurate loads, that level of control is a real advantage.

Can I size only part of the neck with this die set?

Yes, the adjustable decapping rod lets you reposition the bushing so you can size only part of the neck length when you want to. That partial neck sizing can help with brass life and consistency. It's one of the features that makes the Type S setup flexible for different reloading approaches.

Additional information

UPC

611760362750

Manufacturer

Manufacturer Part Number

36275

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Die Set 300 Remington SAUM”