Description
If you handload 300 PRC and you're chasing that last bit of precision, the Forster Ultra Micrometer Seater Die (part number U00114) is the tool that makes repeatable seating depth second nature. It builds on Forster's original Bench Rest seater design, which was the first to hold the bullet and case in near perfect alignment while the bullet gets press-fit into place. Add the micrometer top and you get fine control over cartridge overall length that takes most of the trial and error out of load development.
How the 300 PRC Micrometer Seater Die Keeps Rounds Straight
This is a non-crimping seater, so the bullet seats clean without any mouth crimp pinching things out of true. A spring-loaded, self-centering alignment sleeve squares the bullet to the case neck before the punch ever makes contact, which is where that low runout comes from. The elevated design and tight tolerances mean you get consistent bullet seating round after round, which matters a lot when you're loading heavy, long for caliber bullets like ELD-X and long Bergers that the 300 PRC loves.
Dialing In the Forster Ultra Micrometer Top
The micrometer adjusts in either direction and is graduated in .001 inch increments, with fine tuning down to .0005 inch if you want to split the difference. The bright white index markings are easy to read under bench lighting, so you can seat a bullet close, measure it, then dial the stem exactly where you want it. Once you find the depth your rifle shoots best, you can note the setting and return to it precisely the next time you sit down to load.
Fitting the Die to Your Press
The die threads into any standard 7/8-14 press, so it drops right into most single-stage and turret presses on the bench. If you're running a Forster Co-Ax, no shell holder is needed. In any other press, use the shell holder recommended by that press maker. Built from hardened steel, this is a die made to earn its keep over years of loading.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00114
- UPC: 757253991196
- Caliber: 300 PRC
- Die Type: Bullet Seater Die
- Die Series: Bench Rest Ultra Micrometer
- Crimp Style: Non-crimping
- Micrometer Graduations: .001 inch increments, adjustable to .0005 inch
- Thread Size: Standard 7/8-14
- Gun Type: Rifle
- Pieces in Set: 1
What’s Included
- Forster 300 PRC Ultra Micrometer Seater Die (1 die)
Frequently Asked Questions
Does the 300 PRC Ultra Micrometer Seater Die include a sizing die or shell holder?
No, this is a single bullet seating die and does not include a sizing die or shell holder. You'll need the correct shell holder recommended by your press maker if you're running anything other than a Forster Co-Ax. If you want full length sizing too, Forster offers it as a separate die or as part of a die set.
What makes the micrometer top worth it over a standard seater?
The micrometer lets you adjust seating depth in clean .001 inch clicks, with fine tuning down to .0005 inch, and it holds that setting between sessions. That means once you find the depth your 300 PRC rifle shoots best, you can note the number and return to it exactly. It takes a lot of the guesswork out of load development.
Will this die seat long, heavy 300 PRC bullets without issue?
Yes, the floating self-centering sleeve handles the long, heavy for caliber bullets the 300 PRC is built around, including ELD-X and long Berger projectiles. The non-crimping, straight-line design keeps runout low so those long bullets seat true. With any unusual ogive it's smart to test seat a round first just to confirm fit.
Will the Forster die fit my press?
It uses the standard 7/8-14 thread, so it threads into virtually any single-stage or turret press on the market. If you run a Forster Co-Ax press, no shell holder is required. In any other press, use the shell holder the press manufacturer recommends for 300 PRC.




Reviews
There are no reviews yet.