$207.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Redding 300 PRC Type S Match Bushing Full Die Set is built for folks who chase single-digit SDs and tight groups out of their long range rig. It brings two of Redding's best dies together: a Type S bushing full length sizing die and the micro-adjustable Competition seating die. If you've been running standard dies and wondering why your necks feel inconsistent, this is the set that lets you dial things in with real precision.
The heart of this set is the interchangeable bushing system. Instead of being locked into whatever neck tension the die maker decided on, you pick a bushing in .001 inch increments to get exactly the grip you want on your bullet. The bushing self-centers on the case neck, which helps keep runout low and concentricity high. Because the bushing floats, you're sizing the body and setting shoulder bump in the same stroke while keeping tight control over the neck. One thing worth noting is that bushings are sold separately, so you'll want to measure your loaded neck diameter and order the right size to go with the set.
The adjustable decapping rod lets you position the bushing to size only part of the neck length if you prefer partial neck sizing. It ships with a standard size button plus a decapping pin retainer, so handloaders who turn their necks can skip the button entirely and let the bushing do all the work. Pull the bushing and internal parts out and the die even doubles as a body die when you just need to bump a shoulder.
The included Competition seating die is where a lot of the magic happens on the back end. It uses a sliding chamber that aligns the bullet and case before seating, and the micro-adjustable top makes dialing seating depth fast and repeatable. It comes with a standard seating stem that handles most bullet shapes, with VLD stems available separately if you're loading long, pointy match bullets. Keep in mind this seater is not meant for heavily compressed loads.
Redding uses the industry standard 7/8-14 thread, so this set drops right into any common single stage or turret press.
No, the neck sizing bushings are sold separately so you can match the exact neck tension your load calls for. Measure the neck diameter of a loaded round and subtract about .002 inch as a starting point, then order the bushing in that size. Redding offers bushings in heat-treated steel or with a titanium nitride coating that eases stress on the brass.
Yes, the shellholder is not included and is sold separately. The 300 PRC uses the Redding #6 shellholder. If you already reload other magnum cartridges you may have one on hand that works.
A standard full length die sizes the neck to one fixed diameter set by the factory. This Type S bushing die lets you swap bushings in .001 inch steps to control neck tension precisely while still sizing the body and bumping the shoulder in one stroke. That added control is what competitive and long range handloaders are after.
No, Redding specifically notes the Competition seating die should not be used with compressed loads. It shines with normal seating depth adjustments thanks to its sliding chamber alignment and micro-adjustable top. For long VLD style bullets, a separate VLD seating stem is available.
| UPC | 611760367762 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 36776 |
| Shipping Weight | 1.455 |
You must be logged in to post a review.
Reviews
There are no reviews yet.