0
0

Redding Competition Seater Die 300 AAC Blackout 55327

UPC: 611760553271

$171.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Competition Seater Die for 300 AAC Blackout is one of those tools that reloaders tend to buy once and never second-guess. It's a straight-line seater built around a precision-ground sleeve that captures and supports the case and bullet before seating ever begins, so each round comes out aligned and concentric. If you've chased runout with a standard seater, this is the die that tends to make that frustration go away.

What Sets the 300 Blackout Competition Seater Apart

The heart of this die is the floating seating stem system. The bullet guide and seating stem are honed to nearly the same diameter as a jacketed bullet, fit so tightly that the stem can be shown to float on a column of air. That stem is precision ground, not turned, to match the .308 bullet diameter, which keeps the bullet centered through the entire stroke. For the 300 Blackout crowd loading everything from light supersonic plinkers to heavy subsonic rounds, that kind of alignment pays off downrange.

Dialing In Seating Depth With the Micrometer Head

The micrometer top is calibrated in .001" increments and runs .050" per full revolution, with no clicks, so it's infinitely adjustable to whatever depth your rifle likes. There's also a zero-set feature that lets you lock in your favorite seating depth or jump a particular bullet, then return to it later without trial and error. Swapping between bullet types or load recipes becomes a matter of reading the dial and turning to your number.

Fit, Build, and a Note on Crimping

This is a 7/8"-14 threaded die, so it drops right into any standard reloading press. It's made in the USA and built to the same tolerances that have made Redding Competition seaters a favorite among precision and match handloaders. Worth knowing up front: this die seats bullets only and does not crimp, and the shellholder is sold separately. If your load calls for a crimp, you'll want to add a separate crimp die to the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 55327
  • UPC: 611760553271
  • Caliber: .300 AAC Blackout
  • Die Type: Competition Bullet Seating Die
  • Bullet Diameter: 0.308"
  • Thread Size: 7/8"-14
  • Micrometer Adjustment: .001" increments, .050" per revolution
  • Adjustment Type: Infinitely adjustable, click-free, with zero-set feature
  • Seating Stem: Floating, precision ground to bullet diameter
  • Standard Shellholder: #10 (sold separately)
  • Crimping: Does not crimp
  • Country of Origin: Made in USA

What’s Included

  • Redding Competition Seater Die for 300 AAC Blackout
  • Micrometer adjustment head
  • Floating seating stem

Frequently Asked Questions

Does the 300 Blackout Competition Seater Die crimp the bullet?

No, this die seats bullets only and does not apply a crimp. If your load needs a crimp, you'll want to pick up a separate crimp die to run after seating. Keeping seating and crimping as separate steps is actually a common practice among precision reloaders anyway.

Is a shellholder included with this die?

No, the shellholder is sold separately. The 300 AAC Blackout uses a standard #10 shellholder in most presses. If you already load other .308-head cartridges you may have the right one on hand.

What makes the Redding Competition Seater better than a standard seating die?

The big difference is the floating seating stem and precision-ground sleeve that fully support the case and bullet before seating begins, which keeps rounds concentric and reduces bullet runout. The micrometer head also lets you dial exact seating depth in .001" increments and return to a saved setting, rather than guessing with a set screw. For accuracy-focused handloaders, that repeatability is the main draw.

Will this die work with both subsonic and supersonic 300 Blackout loads?

Yes, it seats .308 diameter bullets across the full range of 300 Blackout bullet weights, including heavy subsonic projectiles and lighter supersonic ones. Just dial the micrometer to the seating depth each bullet and rifle prefers. One thing to keep in mind is that this precision die is not meant for heavily compressed charges, so keep an eye on your powder volume with the longer heavies.

Additional information

UPC

611760553271

Manufacturer

Manufacturer Part Number

55327

Reviews

There are no reviews yet.

Be the first to review “Redding Competition Seater Die 300 AAC Blackout 55327”