$17.60
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run an L.E. Wilson case trimmer and load for the .30 M1 Carbine, this is the holder that keeps your brass in line. Unlike the shell-holder style collets on a lot of trimmers that grip the case rim, the Wilson design slides onto the rails of the trimmer and supports the case body itself, much like the chamber of a rifle. That means the rim never becomes a contact point, so your trim lengths stay tight and uniform from the first case to the last.
This is the fired-case version of the holder, machined to match the dimensions of brass that has already been shot and expanded to chamber size. If you neck-size only, this is your holder. Full-length resized or brand-new factory cases run a bit smaller and are meant for the "new" holder instead, so it pays to match the holder to how you prep your brass. The fit is snug by design, which is what keeps everything centered and prevents the case from spinning while you cut.
Trimming is the main job, but this holder earns its keep in a few other ways too. The same holder works for inside neck reaming, primer pocket reaming, case mouth deburring, and cleaning up military crimps when paired with the right Wilson tools. In use, you drop the case in, tap the head on a block of hardwood to seat it, then tap the mouth to pop it back out when you're done. A wooden dowel or an arbor press makes removal even easier if your brass sits tight.
L.E. Wilson has been a family-run shop since 1927 and has been building case trimmers and holders since 1936. These are made in the USA from polished steel and precision machined for the kind of repeatability that serious handloaders chase. Keep it wiped down and free of brass shavings, store it somewhere dry, and it'll outlast a whole lot of brass.
No, this holder is designed to be used with the L.E. Wilson case trimmer system. It slides onto the rails of a Wilson trimmer and supports the case body, so it won't fit the shell-holder style collets found on RCBS, Lyman, or other brands. If you run a Wilson trimmer, this is the holder you want for .30 Carbine.
The fired-case holder is sized for brass that has already been shot and expanded to chamber dimensions, so it's the right pick if you neck-size only. The new-case holder is cut slightly smaller for brand-new factory brass or cases that have been full-length resized back to spec. Matching the holder to how you prep your brass keeps the fit snug and your trim lengths consistent.
Yes. Beyond trimming, the same holder works for inside neck reaming, primer pocket reaming, case mouth deburring, and removing military crimps when paired with the appropriate Wilson tools. It's a handy piece to have on the bench for more than one step of case prep.
Drop the case into the holder and tap the case head on a block of hardwood to seat it square. When you're finished trimming, tap the case mouth to pop it back out. If the brass sits tight, a wooden dowel or an arbor press makes removal easier, and keeping the holder free of brass shavings helps everything run smoothly.
| UPC | 815145020543 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-CARB |
You must be logged in to post a review.
Reviews
There are no reviews yet.